Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 2000 >> Villager Base >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation - Gasoline >> Fuel System >> Quick-Disconnect Fittings >> Push Connect Coupling

Push Connect Coupling

  1. Release fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect safety clip from male hose. See Fig 1. Install Fuel Line Disconnect (T90T-9550-S) and push it into fitting. Separate fittings.
  2. Before installation, lubricate tube end with clean engine oil. Align tube to fitting and push until a click is heard. Pull on fitting to ensure engagement. Install safety clip.
Fig 1: Disconnecting Fuel Lines With Push Connect Coupling
G99E02483Courtesy of FORD MOTOR CO.
scientia non olet · About Mike's Workshop Manuals