Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercury >> 1997 >> Tracer GS, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Keyless Entry System - Remote) >> Removal & Installation >> Driver Door Module >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 1997 Lincoln Mark VIII. However, it is still accessible from the selected car via links, so may be relevant.

Disconnect negative battery cable. Remove driver's door trim panel. Disconnect wiring connectors from driver's door module. Remove driver's door module. To install, reverse removal procedure. Reprogram keypad and remote transmitters. See KEYPAD  and REMOTE TRANSMITTER  under PROGRAMMING.