Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercedes Benz >> 2024 >> Sprinter 3500 Van Cargo Extended >> Repair and Diagnosis >> External Pages >> Different car >> Section 3190 (Electronic Control Modules (Service Information)) >> Module, Display Screen (DSM) >> Removal And Installation >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2020 Chrysler Voyager and 2020 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect and isolate the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), disconnect the IBS connector first before disconnecting the negative battery cable.
    GC0177182Courtesy of CHRYSLER GROUP, LLC
  2. With a suitable tool, remove the radio display trim bezel (1) and disconnect the two wire harness connectors.
    GC0177722Courtesy of CHRYSLER GROUP, LLC
  3. Remove the five radio screen to radio bezel screws (1), and remove the display (2) from the bezel (3).
scientia non olet · About Mike's Workshop Manuals