Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercedes Benz >> 2021 >> Sprinter 2500 Van Cargo Extended, 2.1L Eng >> Repair and Diagnosis >> External Pages >> Different car >> Section 3190 (Electronic Control Modules (Service Information)) >> Module, Hands Free Liftgate >> Removal And Installation >> Without Trailer Tow >> Installation

Without Trailer Tow: Installation

WARNING: This page is about a different car, the 2020 Chrysler Voyager and 2020 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the Hands Free Entry Power Liftgate (HFEPLG) module to the vehicle for installation.
  2. Install the fasteners to secure the HFEPLG module with sensor to the vehicle.
  3. Connect the wiring harness to the HFEPLG module.
  4. Install the rear fascia. Refer to FASCIA, REAR, REMOVAL AND INSTALLATION .
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About Mike's Workshop Manuals