Table Of Contents For Function Description Of Gasoline Injection And Ignition System With Direct Injection - GF07.70-P-0998MRG
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2023 Mercedes-Benz E63 S AMG, 2023 Mercedes-Benz E53 AMG, 2023 Mercedes-Benz E350, 2022 Mercedes-Benz E53 AMG, and 2022 Mercedes-Benz E350. However, it is still accessible from the selected car via links, so may be relevant.
Engine 264.9 in model 213, 238, 257
up to model year 2021
| Gasoline injection and ignition system with direct injection, function | GF07.70-P-0002MRG | ||
| Crankcase ventilation system, function | GF01.20-P-0001MRG | ||
| Starting, function | GF07.10-P-1001MRG | ||
| Fuel supply, function | GF07.10-P-1003MRG | ||
| Injection regulation, function | GF07.10-P-1004MRG | ||
| Ignition system function | GF07.10-P-1005MRG | ||
| Synchronize fuel injection and firing order function | GF07.10-P-1006MRG | ||
| Start, post-start phase and warm-up enrichment, function | GF07.10-P-1007MRG | ||
| Rpm control, function | GF07.10-P-1008MRG | ||
| Alternator interface function | Engine 264.9 in model 213, 238, 257 up to model year 2021 except code B01 (48V technology) | GF07.10-P-1009MRG | |
| Lambda control, function | GF07.10-P-1010MRG | ||
| Smooth running control, function | GF07.10-P-1011MRG | ||
| Thermal management, function | GF07.10-P-1012MRG | ||
| Torque coordination, function | GF07.10-P-1013MRG | ||
| Overrun mode fuel shutoff, function | GF07.10-P-1014MRG | ||
| Knock control, function | GF07.10-P-1015MRG | ||
| Camshaft adjustment, function | GF07.10-P-1016MRG | ||
| Engine limp-home mode, function | GF07.10-P-1019MRG | ||
| European OBD, function | GF07.10-P-1021MRG | ||
| Ignition, function | GF07.10-P-1023MRG | ||
| ECO start/stop function engine management, function | GF07.10-P-1042MRG | ||
| Charging, function | GF09.00-P-2000MRG | ||
| Exhaust treatment function | GF14.00-P-3000MRG | ||
| Electronic accelerator function | GF30.20-P-3015MRG | ||
| On-board refueling vapor recovery function | Engine 264.9 in model 213 up to model year 2021 with code 494 (US version) | GF47.10-P-3004MRD | |
| Purging function | GF47.30-P-3015MRG | ||
| Purge system with leak test, function | Engine 264.9 in model 213 up to model year 2021 with code 494 (US version) | GF47.30-P-3017MRD | |
| Overview of system components for gasoline injection and ignition system with direct injection | GF07.70-P-9998MRG |