Paintwork Repairs Notes - Ah98.00-P-9408-02A

Service Information: Refinishing paint

SI98.00-P-0002A

Model all (4xWD, CAR, Light transporter) 

With post-repair refinishing only approved materials from our paint partners are to be used.

When applying filler the maximum recommended layer thickness of the approved paint manufacturer must be observed.

With the clear-coat system with higher scratch resistance, the corresponding notes must be observed.

You can find all of the approved materials and manufacturers on the website: https://xentry.mercedes-benz.com under the category "Guide for Paint Technology".

Mask off the vehicles well before painting, since any overspray is very difficult to remove even just a few hours after painting.

Dried paint residues are very difficult to remove from your hands after a few hours. Before starting any work, and after cleaning your hands, rub a skin protection agent into them.