Table Of Contents For Function Description Of Gasoline Injection And Ignition System With Direct Injection - GF07.70-P-0998MMV
WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2023 Mercedes-Benz C43 AMG, 2022 Mercedes-Benz C43 AMG, 2021 Mercedes-Benz C43 AMG, 2020 Mercedes-Benz C43 AMG, and 2019 Mercedes-Benz C43 AMG. However, it is still accessible from the selected car via links, so may be relevant.
Engine 276.8 in model 205, 253
| Gasoline injection and ignition system with direct injection, function | GF07.70-P-0002MMV | ||
| Ignition ON, function | GF07.10-P-1000MMV | ||
| Starting, function | GF07.10-P-1001MMV | ||
| Ignition OFF, function | GF07.10-P-1002MMV | ||
| Fuel supply, function | GF07.10-P-1003MMV | ||
| Injection regulation, function | GF07.10-P-1004MMV | ||
| Ignition system function | GF07.10-P-1005MMV | ||
| Synchronize fuel injection and firing order function | GF07.10-P-1006MMV | ||
| Start, post-start phase and warm-up enrichment, function | GF07.10-P-1007MMV | ||
| RPM control, function | GF07.10-P-1008MMV | ||
| Alternator interface function | GF07.10-P-1009MMV | ||
| Lambda control, function | GF07.10-P-1010MMV | ||
| Smooth running control, function | GF07.10-P-1011MMV | ||
| Thermal management, function | GF07.10-P-1012MMV | ||
| Torque coordination, function | GF07.10-P-1013MMV | ||
| Deceleration fuel shutoff, function | GF07.10-P-1014MMV | ||
| Knock control, function | GF07.10-P-1015MMV | ||
| Camshaft adjustment, function | GF07.10-P-1016MMV | ||
| Engine limp-home mode, function | GF07.10-P-1019MMV | ||
| On-board diagnosis, function | GF07.10-P-1020MMV | ||
| ECO start/stop function engine management, function | GF07.10-P-1042MMV | ||
| Charging, function | GF09.00-P-2000MMV | ||
| Exhaust treatment function | GF14.00-P-3000MMV | ||
| Electronic accelerator function | GF30.20-P-3015MMV | ||
| On-board refueling vapor recovery function | Engine 276.8 in model 205, 253 with code 494 (US version) | GF47.10-P-3004MMV | |
| Purging function | GF47.30-P-3015MMV | ||
| Purging system with leak test function | Engine 276.8 in model 205, 253 with code 494 (US version) | GF47.30-P-3016MMV | |
| Overview of system components for gasoline injection and ignition system with direct injection | GF07.70-P-9998MMV |