Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercedes Benz >> 2018 >> Sprinter 2500 Van Cargo Extended, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 3189 (Electronic Control Modules (Service Information)) >> Module, Emergency Assistance (EAM) >> Removal And Installation >> ECALL Speaker >> Installation

ECALL Speaker: Installation

WARNING: This page is about a different car, the 2020 Chrysler Voyager and 2020 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position the EAM speaker close to the speaker mounting bracket.
  2. Connect the instrument panel wiring harness connectors.
  3. Install and tighten the two screws for the EAM. Tighten the screws securely.
  4. Install the left front lower instrument panel closeout panel (1).
  5. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector.
scientia non olet · About Mike's Workshop Manuals