Transmission DTCS
TRANSMISSION DTCS (722.9 7-SPEED)
| MB DTC | Description | Control Module | Transmission |
|---|---|---|---|
| 0218 | The oil temperature of the transmission is too high. | VGSNAG2 | 722.9 (7-Speed) |
| 0562 | Undervoltage at terminal 87 | VGSNAG2 | 722.9 (7-Speed) |
| 0563 | Overvoltage at terminal 87 | VGSNAG2 | 722.9 (7-Speed) |
| 0601 | An incorrect variant coding or configuration was detected. | VGSNAG2 | 722.9 (7-Speed) |
| 0602 | Control unit 'Y3/8n4 (Fully integrated transmission control control unit)' is not coded. | VGSNAG2 | 722.9 (7-Speed) |
| 0604 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0605 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0606 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is faulty. | VGSNAG2 | 722.9 (7-Speed) |
| 0607 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 060A | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 060C | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0613 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 061B | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 062F | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0633 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0641 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0651 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 06A3 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0701 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0705 | Component 'Y3/8s1 (Selection range sensor)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0711 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0714 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0716 | Overspeeding of the transmission input shaft | VGSNAG2 | 722.9 (7-Speed) |
| 0717 | The signal from component 'Y3/8n1 (Turbine wheel rpm sensor)' is unavailable. | VGSNAG2 | 722.9 (7-Speed) |
| 0718 | Component 'Y3/8n1 (Turbine wheel rpm sensor)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0720 | Mechanical defect in automatic transmission | VGSNAG2 | 722.9 (7-Speed) |
| 0721 | The output speed signal of the automatic transmission is implausible compared to the wheel speed signal. | VGSNAG2 | 722.9 (7-Speed) |
| 0722 | The signal from component 'Y3/8n3 (Output shaft rpm sensor)' is unavailable. | VGSNAG2 | 722.9 (7-Speed) |
| 0723 | Component 'Y3/8n3 (Output shaft rpm sensor)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 0729 | The gear is implausible or the transmission is slipping (gear 6). | VGSNAG2 | 722.9 (7-Speed) |
| 0731 | The gear is implausible or the transmission is slipping (gear 1). | VGSNAG2 | 722.9 (7-Speed) |
| 0732 | The gear is implausible or the transmission is slipping (gear 2). | VGSNAG2 | 722.9 (7-Speed) |
| 0733 | The gear is implausible or the transmission is slipping (gear 3). | VGSNAG2 | 722.9 (7-Speed) |
| 0734 | The gear is implausible or the transmission is slipping (gear 4). | VGSNAG2 | 722.9 (7-Speed) |
| 0735 | The gear is implausible or the transmission is slipping (gear 5). | VGSNAG2 | 722.9 (7-Speed) |
| 0741 | Actuation of the torque converter lockup clutch is not possible. | VGSNAG2 | 722.9 (7-Speed) |
| 0742 | The torque converter lock-up clutch causes impermissible closing. | VGSNAG2 | 722.9 (7-Speed) |
| 0748 | The internal electrical test of component 'Y3/8y2 (K1 clutch control solenoid valve)' has failed. | VGSNAG2 | 722.9 (7-Speed) |
| 076F | The gear is implausible or the transmission is slipping (gear 7). | VGSNAG2 | 722.9 (7-Speed) |
| 0778 | The internal electrical test of component 'Y3/8y5 (B1 multidisk brake control solenoid valve)' has failed. | VGSNAG2 | 722.9 (7-Speed) |
| 0798 | The internal electrical test of component 'Y3/8y7 (B3 multidisk brake control solenoid valve)' has failed. | VGSNAG2 | 722.9 (7-Speed) |
| 0842 | Component 'Y10b1 (Pressure sensor)' or its power supply has an open circuit or short circuit to ground. | VGSNAG2 | 722.9 (7-Speed) |
| 0843 | Component 'Y10b1 (Pressure sensor)' or its power supply has an open circuit or short circuit to positive. | VGSNAG2 | 722.9 (7-Speed) |
| 0893 | Hydraulic fault in transmission | VGSNAG2 | 722.9 (7-Speed) |
| 0894 | The gear is implausible or the transmission is slipping. | VGSNAG2 | 722.9 (7-Speed) |
| 1610 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 1629 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 1634 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 1636 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 1644 | Variant coding of component 'Y3/8n4 (Fully integrated transmission control control unit)' has not yet been performed or is faulty. | VGSNAG2 | 722.9 (7-Speed) |
| 1693 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 1707 | Shutdown of the transmission function due to the occurrence of overtemperature and (or) overvoltage | VGSNAG2 | 722.9 (7-Speed) |
| 1710 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 1711 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 1712 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 2638 | The torque reduction requested by the transmission control is rejected by the engine control system. | VGSNAG2 | 722.9 (7-Speed) |
| 2716 | The internal electrical test of component 'Y3/8y4 (K3 clutch control solenoid valve)' has failed. | VGSNAG2 | 722.9 (7-Speed) |
| 2725 | The internal electrical test of component 'Y3/8y6 (B2 multidisk brake control solenoid valve)' has failed. | VGSNAG2 | 722.9 (7-Speed) |
| 2734 | The internal electrical test of component 'Y3/8y3 (K2 clutch control solenoid valve)' has failed. | VGSNAG2 | 722.9 (7-Speed) |
| 2759 | The internal electrical test of component 'Y3/8y8 (Torque converter lockup clutch control solenoid valve)' has failed. | VGSNAG2 | 722.9 (7-Speed) |
| 2766 | Overspeed of component 'Y3/8n2 (Internal transmission speed rpm sensor)' has occurred. | VGSNAG2 | 722.9 (7-Speed) |
| 2767 | The signal from component 'Y3/8n2 (Internal transmission speed rpm sensor)' is unavailable. | VGSNAG2 | 722.9 (7-Speed) |
| 2768 | Component 'Y3/8n2 (Internal transmission speed rpm sensor)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| 2783 | The friction power of the torque converter lockup clutch is too high. | VGSNAG2 | 722.9 (7-Speed) |
| 2805 | One or more of the signals transmitted by the component 'Y3/8s1 (Selection range sensor)' is implausible in comparison to the signals from the control unit 'N15/5 (Electronic selector lever module control unit)'. | VGSNAG2 | 722.9 (7-Speed) |
| 2806 | Component 'Y3/8s1 (Selection range sensor)' was not taught in. | VGSNAG2 | 722.9 (7-Speed) |
| 2810 | The internal electrical test of component 'Y3/8y1 (Working pressure control solenoid valve)' has failed. | VGSNAG2 | 722.9 (7-Speed) |
| C001 | CAN bus OFF fault | VGSNAG2 | 722.9 (7-Speed) |
| C002 | CAN bus OFF fault | VGSNAG2 | 722.9 (7-Speed) |
| C100 | No CAN message was received from control unit 'Engine control system'. | VGSNAG2 | 722.9 (7-Speed) |
| C103 | No CAN message was received from control unit 'N15/5 (Electronic selector lever module control unit)'. | VGSNAG2 | 722.9 (7-Speed) |
| C114 | No CAN message was received from control unit 'N15/7 (Transfer case control module)'. | VGSNAG2 | 722.9 (7-Speed) |
| C121 | CAN communication with the traction system has a malfunction. | VGSNAG2 | 722.9 (7-Speed) |
| C126 | CAN communication with control unit 'N80 (Steering column tube module control unit)' has a malfunction. | VGSNAG2 | 722.9 (7-Speed) |
| C132 | No CAN message was received from control unit 'N97 (Electronic level control [ENR] control unit)'. | VGSNAG2 | 722.9 (7-Speed) |
| C141 | CAN communication with control unit 'N73 (Electronic ignition lock control unit)' has a malfunction. | VGSNAG2 | 722.9 (7-Speed) |
| C155 | CAN communication with control unit 'A1 (Instrument cluster)' has a malfunction. | VGSNAG2 | 722.9 (7-Speed) |
| C164 | CAN communication with control unit 'Air conditioning' has a malfunction. | VGSNAG2 | 722.9 (7-Speed) |
| C167 | Communication with the electronic ignition lock has a malfunction. | VGSNAG2 | 722.9 (7-Speed) |
| C300 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| C401 | The CAN signals sent from control unit 'Engine control system' are incomplete. | VGSNAG2 | 722.9 (7-Speed) |
| C404 | No CAN message was received from control unit 'N15/5 (Electronic selector lever module control unit)'. | VGSNAG2 | 722.9 (7-Speed) |
| C414 | No CAN message was received from control unit 'N15/7 (Transfer case control module)'. | VGSNAG2 | 722.9 (7-Speed) |
| C415 | The CAN signals sent from control unit 'N30/4 (Electronic Stability Program control unit)' are incomplete. | VGSNAG2 | 722.9 (7-Speed) |
| C421 | The CAN signals sent from control unit 'N97 (Electronic level control [ENR] control unit)' are incomplete. | VGSNAG2 | 722.9 (7-Speed) |
| C423 | The CAN signals sent from control unit 'A1 (Instrument cluster)' are incomplete. | VGSNAG2 | 722.9 (7-Speed) |
| C424 | The CAN signals sent from control unit 'Air conditioning' are incomplete. | VGSNAG2 | 722.9 (7-Speed) |
| C428 | No CAN message was received from control unit 'N80 (Steering column tube module control unit)'. | VGSNAG2 | 722.9 (7-Speed) |
| C429 | No CAN message was received from control unit 'N80 (Steering column tube module control unit)'. | VGSNAG2 | 722.9 (7-Speed) |
| C431 | One or more signals sent from control unit 'N73 (Electronic ignition lock control unit)' via the CAN bus is implausible. | VGSNAG2 | 722.9 (7-Speed) |
| C439 | One or more signals sent from control unit 'N72/1s25 (Off-road program button)' via the CAN bus is implausible. | VGSNAG2 | 722.9 (7-Speed) |
| C55A | No CAN message was received from control unit 'Engine control system'. | VGSNAG2 | 722.9 (7-Speed) |
| C55B | No CAN message was received from control unit 'Engine control system'. | VGSNAG2 | 722.9 (7-Speed) |
| D10B | No CAN message was received from control unit 'Engine control system'. | VGSNAG2 | 722.9 (7-Speed) |
| D138 | One or more messages sent from control unit 'N89 (Transmission oil auxiliary pump control unit)' via the CAN bus are not available. | VGSNAG2 | 722.9 (7-Speed) |
| D139 | No CAN message was received from control unit 'N80 (Steering column tube module control unit)'. | VGSNAG2 | 722.9 (7-Speed) |
| D13A | No CAN message was received from control unit 'N80 (Steering column tube module control unit)'. | VGSNAG2 | 722.9 (7-Speed) |
| D400 | The value transmitted by the engine control system for the accelerator pedal is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D401 | The engine speed of the engine control system is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D402 | The temperature of the engine control system is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D404 | The engine torque statically specified by the engine control system is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D405 | The minimum engine torque of the engine control system is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D406 | The maximum engine torque of the engine control system is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D407 | The engine torque specified for the traction system and transmitted by the engine control system is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D408 | Signal 'Brake light switch' transmitted by the traction system is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D409 | The left front wheel speed signal from the traction system is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D40A | The right front wheel speed from the control unit 'N30/4 (Electronic Stability Program control unit)' is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D40B | The left rear wheel speed from the control unit 'N30/4 (Electronic Stability Program control unit)' is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D40C | The right rear wheel speed from the control unit 'N30/4 (Electronic Stability Program control unit)' is not available on the CAN bus. | VGSNAG2 | 722.9 (7-Speed) |
| D420 | CAN communication with control unit 'N80 (Steering column tube module control unit)' has a malfunction. | VGSNAG2 | 722.9 (7-Speed) |
| D504 | One or more signals sent from control unit 'N80 (Steering column tube module control unit)' via the CAN bus is implausible. | VGSNAG2 | 722.9 (7-Speed) |
| D505 | One or more signals sent from control unit 'N15/7 (Transfer case control module)' via the CAN bus is implausible. | VGSNAG2 | 722.9 (7-Speed) |
| D507 | The CAN signals sent from control unit 'Engine control system' are incomplete. | VGSNAG2 | 722.9 (7-Speed) |
| D508 | CAN communication with control unit 'N15/5 (Electronic selector lever module control unit)' has a malfunction. | VGSNAG2 | 722.9 (7-Speed) |
| D50B | One or more signals sent from control unit 'N15/5 (Electronic selector lever module control unit)' via the CAN bus is implausible. | VGSNAG2 | 722.9 (7-Speed) |
| D50C | The CAN signals sent from control unit 'N89 (Transmission oil auxiliary pump control unit)' are incomplete. | VGSNAG2 | 722.9 (7-Speed) |
| D601 | The automatic address allocation or the programming is faulty. | VGSNAG2 | 722.9 (7-Speed) |
| D60E | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |
| F000 | Component 'Y3/8n4 (Fully integrated transmission control control unit)' is defective. | VGSNAG2 | 722.9 (7-Speed) |