Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercedes Benz >> 2017 >> Metris Van Cargo >> Repair and Diagnosis >> General Information >> Reset Procedures >> Tire Pressure Monitor Systems >> TPMS Reset Procedures >> Tire Pressure Monitor System Reactivation >> Vehicles With Steering Wheel Buttons

Vehicles With Steering Wheel Buttons

  1. Turn the key to POSITION 2 in the ignition lock.
  2. Press the FORWARD or BACK arrow button on the steering wheel (left side) to select the SERVICE menu.
  3. Press the UP or DOWN arrow button to select the TIRE PRESSURE submenu.
  4. Press OK to confirm. The display shows either the current tire pressure for the individual tires, or the TIRE PRESS. DISPLAYED AFTER DRIVING FOR SEVERAL MINUTES message.
  5. Press the DOWN arrow button. The following message is displayed: USE CURRENT PRESSURES AS NEW REFERENCE VALUES.
  6. Press OK. The display shows the TIRE PRESS. MONITOR RESTARTED message.After you have driven for a few minutes, the system checks whether the current tire pressures are within the specified range. The new tire pressures are then accepted as reference values and are monitored.
NOTE: If you wish to cancel the reactivation process: Press the RETURN button on the steering wheel.
scientia non olet · About Mike's Workshop Manuals