Service Campaign No. 2017120005, Perform SCN Coding In Esp Control Unit (P-SC-2017120005)

Publication date: 2018-01-01
Reference number: P-SC-2017120005

SERVICE CAMPAIGN NO. 2017120005, PERFORM SCN CODING IN ESP CONTROL UNIT

SERVICE CAMPAIGN BULLETIN

Reference Number(s): P-SC-2017120005, Date of Issue: January 01, 2018

MERCEDES-BENZ:

Model 213, Model Year 2017

SUBJECT

Model 213, Model Year 2017

Daimler AG ('DAG'), the manufacturer of Mercedes-Benz vehicles, has determined that on certain MY17 E-Class (213 platform) vehicles, the Electronic Stability Program (ESP) control unit software may not meet current series production specifications. An authorized Mercedes-Benz dealer will update the ESP control unit software on the affected vehicles.

Prior to performing this Service Campaign:

Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.

Approximately 859 vehicles are affected.

Order No. P-SC-2017120005

This bulletin has been created and maintained in accordance with MBUSA-SLP S423QH001, Document and Data Control, and MBUSA-SLP S424HH001, Control of Quality Records.

PROCEDURE

NOTE:

Use DAS/Xentry 07/17 with all associated patches or higher.
Follow the steps exactly as described in DAS/Xentry.
Connect battery charger (battery voltage >12.5V).
Ensure all electrical consumers are switched-off.
In the event of software/SCN update issues, contact Star Diagnosis User Help Desk. Please refer to the "pre-call" check list before contacting UHD
Refer to Star Diagnosis System (SDS) Best Practices Guide.

Perform SCN coding in the ESP control unit: Control units view → Chassis → ESP Electronic Stability Program → Adaptations → Control unit update → Update of SCN coding.
Follow on-screen instructions.

NOTE: The following allowable labor operation should be used when submitting a warranty claim for this repair:

WARRANTY INFORMATION

Operation: Connect/disconnect battery charger (02-5058)

Star Diagnosis System (SDS), Connect/disconnect (02-4762)

Perform SCN coding in the ESP control unit (02-9446)

WARRANTY INFORMATION

Damage Code	Operation Number	Labor Time (hrs.)
42 940 41 8	02-5058	0.1
	02-4762	0.1
	02-9446	0.1

NOTE: Operation Number labor times are subject to change.