Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercedes Benz >> 2015 >> Sprinter 2500 Van Cargo Extended, 2.1L Eng >> Repair and Diagnosis >> External Pages >> Different car >> Section 3189 (Electronic Control Modules (Service Information)) >> Module, Electronic Shift (ESM) >> Removal And Installation >> Removal And Installation >> Installation

Removal And Installation: Installation

WARNING: This page is about a different car, the 2020 Chrysler Voyager and 2020 Chrysler Pacifica. However, it is still accessible from the selected car via links, so may be relevant.
GC0178080Courtesy of CHRYSLER GROUP, LLC
  1. Position the ESM in the ICS (1), install the four ESM bolts (2) and tighten securely.
  2. Connect the wire harness connectors to the ESM and ICS assembly.
    GC0177333Courtesy of CHRYSLER GROUP, LLC
  3. Install the ICS (1) in the vehicle. Refer to CONTROLS, REAR CABIN COMFORT (RCCC)., REMOVAL AND INSTALLATION MODULE, INTEGRATED CENTER STACK (ICSM), REMOVAL AND INSTALLATION .
  4. Connect the negative battery cable. If equipped with an Intelligent Battery Sensor (IBS), connect the IBS connector to the negative battery cable.
  5. Release the parking brake.
scientia non olet · About Mike's Workshop Manuals