Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercedes Benz >> 2012 >> Sprinter 2500, Van Crew Extended >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control - Testing & Repair - Model 906 >> Testing & Repair >> Remove/Install Bathroom Unit Heating Convector - Ar83.70-S-5900JC

Remove/Install Bathroom Unit Heating Convector - Ar83.70-S-5900JC

MODEL 906.633 with CODE (ZO1) Camper James Cook Compact with CODE (ZO2) Camper James Cook Classic 

G10890374Courtesy of MERCEDES-BENZ USA
MODIFICATION NOTES

23.10.07 Method extended due to design change Steps 5, 10 AR83.70-S-5900-01JC 
REMOVINGINSTALLING Remove/install     
1 Remove paneling below bathroom unit sink. INSTALLATION IMPORTANT Only install again after performing bleeding procedure. AR86.60-S-0075JC
2 Drain heating system INSTALLATION IMPORTANT Refill heating system and bleed, checking hoses (2) for leaktightness. AR83.70-S-5900-01JC 
NOTES Notes on coolant All engines AH20.00-N-2080-01A
3 Remove paneling (1) IMPORTANT For this, purpose unclip paneling (1).
INSTALLATION IMPORTANT Only install again after performing bleeding procedure.
 
4 Detach hoses (2)    
5 Remove convector (3) IMPORTANT To do this, unclip convector (3) and detach hoses (2), collect escaping coolant. Do not remove check valve in convector (3).  
6 Install in the reverse order