Electronic Shift Lever DTCS
ELECTRONIC SHIFT LEVER DTCS (EWM VERSION 906)
| MB DTC | Description |
|---|---|
| 0001 | The voltage at circuit 15 of control unit 'ESM [EWM]' is too high (overvoltage). |
| 0002 | The voltage at circuit 15 of control unit 'ESM [EWM]' is too low (undervoltage). |
| 0003 | Drive train CAN bus OFF fault |
| 0004 | No CAN message was received from control unit 'ESP®'. |
| 0005 | No CAN message was received from control unit 'EZS'. |
| 0006 | No CAN message was received from control unit 'IC'. |
| 0007 | Control unit 'ESM [EWM]' is defective. |
| 0008 | Component 'Function illumination' has an open circuit. |
| 0009 | Component 'Function illumination' has a short circuit. |
| D601 | One of the software modules of the control unit is missing or corrupt. |