ME-SFI driving mode, function - GF07.61-P-2005CY
ENGINE 272.911 in MODEL 204.0 up to Model Year 2008/AEJ 07
ENGINE 272.921 in MODEL 204.0/2 up to Model Year 2008/AEJ 07
ENGINE 272.947 in MODEL 204.0/2 up to Model Year 2008/AEJ 07
ENGINE 272.948 in MODEL 204.0 up to Model Year 2008/AEJ 07
ENGINE 272.961 in MODEL 204.0/2 up to Model Year 2008/AEJ 07
ENGINE 272.971 in MODEL 204.0 up to Model Year 2008/AEJ 07
The following sub-functions are active in driving mode,:
| Voltage supply of ME-SFI [ME] control unit, function | GF07.61-P-5001CY | |
| Diagnosis fault memory, ME-SFI function | GF07.61-P-2004CY | |
| ME fuel supply, function | GF07.61-P-3004CY | |
| ME Flexible Fuel Vehicle (FFV), function | For model 204.054/254 with code 494 USA version | GF07.61-P-3021CY |
| Motor electronics (ME) ignition system, function | GF07.61-P-3008CY | |
| ME-SFI post-start enrichment, function | GF07.61-P-3011CY | |
| ME-SFI warm-up control, function | GF07.61-P-3022CY | |
| ME-SFI catalytic converter heating-up, function | GF07.61-P-3032CY | |
| Air injection, function | GF14.30-P-3012CY | |
| Camshaft adjustment, function | GF07.61-P-4021CY | |
| ME-SFI part load/full load operation, function | GF07.61-P-3016CY | |
| ME-SFI lambda control, function | GF07.61-P-4022CY | |
| ME-SFI two-sensor control, function | GF07.61-P-3020CY | |
| O2 sensor heater, function | GF07.61-P-3025CY | |
| Catalytic converter efficiency monitoring function | GF49.10-P-3033CY | |
| ME engine speed signal, function | GF07.61-P-3017CY | |
| ME-SFI synchronization of fuel injection and firing order, function | GF07.61-P-4009CY | |
| ME-SFI maximum engine speed limitation, function | GF07.61-P-3007CY | |
| ME-SFI limiting maximum vehicle speed, function | GF07.61-P-3019CY | |
| ME-SFI acceleration enrichment, function | GF07.61-P-3015CY | |
| ME-SFI safety fuel shutoff, function | GF07.61-P-3018CY | |
| ME-SFI alternator interface function | GF07.61-P-3003CY | |
| Fan control, function | GF07.61-P-3023CY | |
| Engine oil information, function | GF07.61-P-3026CY | |
| Fuel consumption signal, function | GF07.10-P-1028CY | |
| Self-adjustment of mixture formation, function | GF07.10-P-1029CY | |
| Smooth engine running analysis, function | GF07.10-P-1030CY | |
| ME engine torque requirements function | GF07.61-P-4015CY | |
| ME engine coolant heat management function | GF07.61-P-4016CY | |
| Intake manifold switchover, function | GF07.61-P-3028CY | |
| ME tumble flap switchover function | GF07.61-P-4017CY | |
| ME-SFI overrun fuel shutoff, function | GF07.61-P-4019CY | |
| ME-SFI transmission shift delay, function | For code 427, 7-speed automatic transmission | GF07.61-P-4023CY |
| Transmission overload protection, function | For code 427, 7-speed automatic transmission | GF07.61-P-4026CY |
| Overheating/pinging protection, function | GF07.61-P-4027CY | |
| Knock control function | GF15.12-P-4024CY | |
| ME-SFI electronic accelerator, function | GF30.20-P-3012CY | |
| Electronic accelerator pedal emergency running mode, function | GF30.20-P-4026CY | |
| Fuel evaporation control system, function | GF47.30-P-3013CY |