ME-SFI idle, function - GF07.61-P-2006MIG

ENGINES 272.945 in MODEL 251.054/154 as of model year 2009/AEJ 08 

ENGINES 272.967 in MODEL 164.186 as of model year 2009/AEJ 08 model refinement package 

ENGINES 272.967 in MODEL 164.156 

ENGINES 272.967 in MODEL 251.056/065/156/165 as of model year 2009/AEJ 08 

ENGINES 273.923 in MODEL 164.871 as of model year 2009/AEJ 08 

ENGINES 273.963 in MODEL 164.172 as of model year 2009/AEJ 08 model refinement package 

ENGINES 273.963 in MODEL 164.886, 251.072/172 as of model year 2009/AEJ 08 

Function requirements for iding, general points 

• Circuit 87M ON (engine control ON)
• Engine running (engine speed >700 RPM)
• Accelerator not operated

Neutral, general points 

The following partial functions are active in neutral and are described in the following :

• ME fuel supply, function 
• ME-SFI [ME] injection regulation, function 
• Motor electronics (ME) ignition system, function 
• ME-SFI start, post-start phase and warm-up enrichment, function 
• ME-SFI idle speed control function 
• ME-SFI alternator interface function 
• ME engine speed signal, function 
• ME-SFI safety fuel shutoff, function 
• ME-SFI lambda control, function 
• ME-SFI two-sensor control, function 
• ME-SFI oxygen sensor heater function 
• Self-adjustment of mixture formation, function 
• Smooth engine running analysis, function 
• ME-SFI thermal management, function 
• ME engine torque requests function 
• Camshaft adjustment, function 
• ME-SFI knock control function 
• Overheating/pinging protection, function 
• Air injection, function 
• ME-SFI electronic accelerator, function 
• Electronic accelerator pedal emergency running mode, function 
• Purging function 
• Monitoring catalytic converter efficiency, function 

ME fuel supply, function	GF07.61-P-3004MIG
ME-SFI [ME] injection regulation, function	GF07.61-P-3002MIG
Motor electronics (ME) ignition system, function	GF07.61-P-3008MIG
ME-SFI start, post-start phase and warm-up enrichment, function	GF07.61-P-3014MIG
ME-SFI idle speed control function	GF07.61-P-2008MIG
ME-SFI alternator interface function	GF07.61-P-3003MIG
ME engine speed signal, function	GF07.61-P-3017MIG
ME-SFI safety fuel shutoff, function	GF07.61-P-3018MIG
ME-SFI lambda control, function	GF07.61-P-4022MIG
ME-SFI two-sensor control, function	GF07.61-P-3020MIG
ME-SFI oxygen sensor heater function	GF07.61-P-3024MIG
Self-adjustment of mixture formation, function	GF07.10-P-1029MIG
Smooth engine running analysis, function	GF07.10-P-1030MIG
ME-SFI thermal management, function	GF07.61-P-4012MIG
ME engine torque requests function	GF07.61-P-4013MIG
Camshaft adjustment, function	GF07.61-P-4021MIG
ME-SFI knock control function	GF07.61-P-4031MIG
Overheating/pinging protection, function	GF07.61-P-4027MIG
Air injection, function	GF14.30-P-3012MIG
ME-SFI electronic accelerator, function	GF30.20-P-3012MIG
Electronic accelerator pedal emergency running mode, function	GF30.20-P-4026MIG
Purging function	GF47.30-P-3015MIG
Monitoring catalytic converter efficiency, function	GF49.10-P-3033MIG