ME-SFI driving mode, function - GF07.61-P-2005MIG
ENGINES 272.945 in MODEL 251.054/154 as of model year 2009/AEJ 08
ENGINES 272.967 in MODEL 164.186 as of model year 2009/AEJ 08 model refinement package
ENGINES 272.967 in MODEL 164.156
ENGINES 272.967 in MODEL 251.056/065/156/165 as of model year 2009/AEJ 08
ENGINES 273.923 in MODEL 164.871 as of model year 2009/AEJ 08
ENGINES 273.963 in MODEL 164.172 as of model year 2009/AEJ 08 model refinement package
ENGINES 273.963 in MODEL 164.886, 251.072/172 as of model year 2009/AEJ 08
Function requirements for driving mode, general points
- Circuit 87M ON (engine control ON)
- Engine running
Driving mode, general points
The following partial functions are active in driving mode and are described in the following s:
- ME fuel supply, function
- ME-SFI [ME] injection regulation, function
- Motor electronics (ME) ignition system, function
- ME-SFI start, post-start phase and warm-up enrichment, function
- ME-SFI alternator interface function
- ME engine speed signal, function
- ME-SFI maximum engine speed limitation, function
- ME-SFI limiting maximum vehicle speed, function
- ME-SFI safety fuel shutoff, function
- Intake manifold switchover function
- ME-SFI tumble flap switchover function
- ME-SFI lambda control, function
- ME-SFI two-sensor control, function
- ME-SFI oxygen sensor heater function
- Self-adjustment of mixture formation, function
- Smooth engine running analysis, function
- ME-SFI thermal management, function
- ME engine torque requests function
- ME-SFI overrun fuel shutoff, function
- Camshaft adjustment, function
- ME-SFI transmission shift delay, function
- ME-SFI knock control function
- Overheating/pinging protection, function
- Air injection, function
- ME-SFI electronic accelerator, function
- Electronic accelerator pedal emergency running mode, function
- Purging function
- System purging with leak test function (with code (494) USA version)
- Monitoring catalytic converter efficiency, function
| ME fuel supply, function | GF07.61-P-3004MIG |
| ME-SFI [ME] injection regulation, function | GF07.61-P-3002MIG |
| Motor electronics (ME) ignition system, function | GF07.61-P-3008MIG |
| ME-SFI start, post-start phase and warm-up enrichment, function | GF07.61-P-3014MIG |
| ME-SFI alternator interface function | GF07.61-P-3003MIG |
| ME engine speed signal, function | GF07.61-P-3017MIG |
| ME-SFI maximum engine speed limitation, function | GF07.61-P-3007MIG |
| ME-SFI limiting maximum vehicle speed, function | GF07.61-P-3019MIG |
| ME-SFI safety fuel shutoff, function | GF07.61-P-3018MIG |
| Intake manifold switchover function | GF07.61-P-3028MIG |
| ME-SFI tumble flap switchover function | GF07.61-P-4017MIG |
| ME-SFI lambda control, function | GF07.61-P-4022MIG |
| ME-SFI two-sensor control, function | GF07.61-P-3020MIG |
| ME-SFI oxygen sensor heater function | GF07.61-P-3024MIG |
| Self-adjustment of mixture formation, function | GF07.10-P-1029MIG |
| Smooth engine running analysis, function | GF07.10-P-1030MIG |
| ME-SFI thermal management, function | GF07.61-P-4012MIG |
| ME engine torque requests function | GF07.61-P-4013MIG |
| ME-SFI overrun fuel shutoff, function | GF07.61-P-4019MIG |
| Camshaft adjustment, function | GF07.61-P-4021MIG |
| ME-SFI transmission shift delay, function | GF07.61-P-4023MIG |
| ME-SFI knock control function | GF07.61-P-4031MIG |
| Overheating/pinging protection, function | GF07.61-P-4027MIG |
| Air injection, function | GF14.30-P-3012MIG |
| ME-SFI electronic accelerator, function | GF30.20-P-3012MIG |
| Electronic accelerator pedal emergency running mode, function | GF30.20-P-4026MIG |
| Purging function | GF47.30-P-3015MIG |
| Purging system with leak test function | GF47.30-P-3016MIG |
| Monitoring catalytic converter efficiency, function | GF49.10-P-3033MIG |