Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercedes Benz >> 2007 >> ML63 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Fuel, Ignition, Engine Control - Basic Knowledge - 1 Of 2 -- 164 Chassis >> Basic Knowledge >> CDI fuel tank protection, function - GF07.16-P-3019P

CDI fuel tank protection, function - GF07.16-P-3019P

ENGINES 642.9 in MODEL 164.1 /8, 203.0 /2, 204.0 /2, 209.3 /4, 211.0 /2 /6, 219.3, 221.0 /1, 251.0 /1 

ENGINES 642.9 in MODEL 463.3 

ENGINES 642.9 in MODEL 461.3 

Through increasing the fuel pressure via the common rail high pressure pump by 4.5 bar up to 1600 bar the temperature of the fuel also increases. To protect the fuel tank from overheating, the CDI control unit (N3/9) reads the fuel temperature sensor (B50) (model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 461, 463) or the fuel temperature sensor (B50) (model 204.0/2) and thus monitors the temperature of the fuel supplied to the common rail high-pressure pump. If the temperature of the fuel delivered to the common rail high pressure pump goes above 90°C the injection quantity and rail pressure are automatically reduced. This causes the fuel less to be less compressed. The quantity control valve (Y94) diverts excess fuel back into the tank.

If the temperature of the fuel supplied to the common rail high-pressure pump falls below 90°C, the tank protection function is deactivated by the CDI control unit.

  Component description for rail pressure sensor Model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 461, 463
B4/6
GF07.04-P-6210P 
    Model 204.0/2
B4/6
GF07.04-P-6210CO
  Component description for quantity control valve Model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 461, 463
Y94
GF07.05-P-6010P 
    Model 204.0/2
Y94
GF07.05-P-6010CO
  Component description for pressure regulator valve Model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 461, 463
Y74
GF07.05-P-6020P 
    Model 204.0/2
Y74
GF07.05-P-6020CO
  Component description for CDI control unit Model 203, 209
N3/9
GF07.16-P-6000P
    Model 211, 219
N3/9
GF07.16-P-6000T
    Model 164, 463
N3/9
GF07.16-P-6000GZ
    Model 221
N3/9
GF07.16-P-6000SX
    Model 251
N3/9
GF07.16-P-6000RT
    Model 204.0/2
N3/9
GF07.16-P-6000CO
    Model 461
N3/9
GF07.16-P-6000GX
  Component description for fuel temperature sensor Model 164.1/8, 203.0/2, 209.3/4, 211.0/2/6, 219.3, 221.0/1, 251.0/1, 461, 463
B50
GF47.50-P-2010P
  Component description for fuel temperature sensor Model 204.0/2
B50
GF47.50-P-2011CO