Function of manual drive mode selection - GF27.60-P-3011PZ
TRANSMISSION 722.6 in MODEL 203 as of 1.6.03 up to 23.4.04
TRANSMISSION 722.6
in MODEL 209.3 (except 209.376) as of 1.6.03,
209.4 (except 209.476),
211 (except 211.076 /05 /25 /276) as of 1.9.03 except CODE (428a) Steering wheel shift buttons
With the selector lever and the transmission mode switch (S16/5) on the floor shift it is possible to adapt the automatic gearshift sequence to suit specific operating conditions.
The shift range can in fact be changed in the forward gears while driving, however the electronic transmission control (ETC) prevents a shift at an unacceptably high engine speed.
In position "C" (comfort program) of the transmission mode switch (S16/5) a lower overall ratio and therefore a lower output torque is available when driving backwards and forwards. This allows the vehicle to move off more gently. In addition, the gears are not driven to maximum revs.
| Location/task/design/function of floor shift | GF27.60-P-5100P | ||
| Location/task/design/function of shift detent | GF27.60-P-5101P | ||
| R/P lock, location/task/design/function | GF27.60-P-5103P | ||
| Location/task/function of position indicator | Model 203, 209 | GF27.19-P-5129PZ | |
| Model 211 | GF27.19-P-5129TZ | ||
| ETC control unit, location/task | GF27.19-P-4012G | ||
| Electronic selector lever module control unit, location/task/design | GF27.19-P-5138P |