Removal & Installation Clk & Slk
WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2000 Mercedes-Benz SLK230, 2000 Mercedes-Benz SL600, 2000 Mercedes-Benz SL500, 2000 Mercedes-Benz S500, and 2000 Mercedes-Benz S430. However, it is still accessible from the selected car via links, so may be relevant.
- Before proceeding, See AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Remove ignition key. Remove cover on center console. Remove cover on shift lever. Remove ash tray housing with storage compartment at front of center console. Unplug connectors at control module and remove Torx mounting screws. Remove control module.
- To install, reverse removal procedure. Ensure SRS control module arrow points to front of vehicle. Set parameters and program new SRS control module with Hand-Held Tester (965 589 00 01 00). Activate air bag system. Perform system operation check to ensure system is functioning properly. See SYSTEM OPERATION CHECK .