DTC Description

Fault Memory & Actuation Of MIL - Fault memory is stored immediately. Malfunction Indicator Light (MIL) is not actuated.
Frequency Of Testing - Continuous.
Checked Signal Or Status - Comparison of voltage signals 1 and 2.
Voltage Difference Between Signal 1 & Signal 2 - If voltage difference is more than 8 percent (up to approximately 60 percent torque angle at pedal value sensor) or more than 25 percent (as of 60 percent torque angle). For comparison purposes, voltage signal 2 is multiplied by 2.
Duration Of Test - Approximately 30 seconds.

NOTE: If a fault is detected, a switch to limp-home mode is implemented.