Hydraulic Unit: Installation

WARNING: This page is about a different car, the 1996 Mercedes-Benz E320, 1996 Mercedes-Benz E300, 1995 Mercedes-Benz E420, 1995 Mercedes-Benz E320, and 1995 Mercedes-Benz E300. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Ensure hydraulic unit does not contact body. Connect brakelines to hydraulic unit. Bleed brake system. Check for leaks. Brakeline identification codes are as follows:

Code "V" is master cylinder-to-front brake circuit line.
Code "H" is master cylinder-to-rear brake circuit line.
Code "l" is hydraulic unit-to-left front brakeline.
Code "r" is hydraulic unit-to-right front brakeline.
Code "h" is hydraulic unit-to-rear brakeline.