Windows - 215 & 220 Chassis
- General Information
- Basic Knowledge
- Windshield defroster, function - GF67.10-P-0001MB
- Table of contents, function description of windshield defroster - GF67.10-P-0999MB
- Windshield defroster switch, location/purpose - GF67.10-P-2100MB
- Windshield defroster relay, location/purpose - GF67.10-P-2101MB
- Survey of system components for windshield defroster, location/purpose/design/function - GF67.10-P-9999MB
- Rear window defroster (RWD), function - GF67.29-P-0003S
- Table of contents, function description of rear window defroster (RWD) - GF67.29-P-0998SZ
- Switching off when voltage is too low, function - GF67.29-P-2005S
- Opening/closing rear window, function - GF67.39-P-3001A
- Safety Precautions
- Risk of injury caused by slipping when clamping blade in the multicutter and by glass splinters when cutting out bonded windows - AS67.00-Z-0001-01A
- Risk of injury from contusions to hands if window glass is not secured - AS67.00-Z-0002-01A
- Risk of injury from pinching and crushing hands and feet when working on windows. - AS67.00-Z-0003-01A
- Risk of injury from cutting wire tearing or becoming hot and from splinters of glass when cutting out bonded windows - AS67.00-Z-0004-01A
- Safety information: Windows - AS67.00-Z-9999ZZ
- Trouble Diagnosis
- Testing & Repair
- Testing and repair work: Passenger cars: Windows - AR67.00-Z-9215AA
- Testing and repair work: Passenger cars: Windows - AR67.00-Z-9220AA
- Remove/install windshield - AR67.10-P-1000
- Remove/install windshield - AR67.10-P-1000M
- Notes
- Cutting out windshield with cutting blades - AR67.10-P-1000-01M
- Replace window rubber spacers - AR67.10-P-1000-02M
- Prepare window for installation - AR67.10-P-1000-03P
- Aligning windshield in body opening - AR67.10-P-1000-04K
- Prepare glue cartridge - AR67.10-P-1000-07P
- Apply adhesive material - AR67.10-P-1000-08P
- Remove/install windshield - AR67.10-P-1000MB
- Remove/install windshield - AR67.10-P-1000N
- Remove/install windshield - AR67.10-P-1000M
- Removing and installation windshield molding - AR67.10-P-1200M
- Prepare body flange for installation of window/glazing - AR67.10-P-1501
- Install windshield - AR67.10-P-1503-01K
- Prepare rear window for installation/glazing - AR67.20-P-1000
- Remove/install rear window - AR67.20-P-2000
- Remove/install rear window ornamental frame - AR67.20-P-2200M
- Cut out rear window with cutting wire - AR67.20-P-5145-01N
- Removing / Installing rear side window seal - AR67.30-P-0001M
- Removing and installing rear side window - AR67.30-P-4000N
- Adjusting rear side windows - AR67.30-P-4200N
- Removing and installing electric window lift mechanism for rear side window - AR67.39-P-4150N
- Removing and installing motor for power window control for rear side window - AR67.39-P-4160N
- Removing and installing rear control module - AR67.39-P-4170N
- Removing and installing power window switch for rear side window - AR67.39-P-4180N
- Test & Adjustment Values
- Maintenance