Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercedes Benz >> 2000 >> C43 >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Engine Controls - Self-Diagnostics With Codes) >> Self-Diagnostic System >> Check Engine Light

Check Engine Light

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2000 Mercedes-Benz SLK230, 2000 Mercedes-Benz C230, 1999 Mercedes-Benz SLK230, 1999 Mercedes-Benz C230, and 1998 Mercedes-Benz SLK230. However, it is still accessible from the selected car via links, so may be relevant.

The ECM is equipped with Diagnostic Trouble Code (DTC) memory. Malfunctions are stored as constantly present or intermittent (occurred during a trip). DTC memory is erased when battery is disconnected. Malfunctions which are no longer present are erased as follows: after 3 trips CHECK ENGINE light goes out and after an additional 40 warm-up periods, DTC is automatically erased.

A warm-up period is defined as engine coolant temperature less than 95°F (35°C) at engine start with engine coolant temperature increasing to more than 158°F (70°C). A trip is defined as follows: