Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mercedes Benz >> 2000 >> C280 >> Repair and Diagnosis >> External Pages >> Different car >> Section 12 (Engine Controls - Tests W/Codes) >> Self-Diagnostic System >> HFM-SFI

Self-Diagnostic System: HFM-SFI

WARNING: This page is about a different car, the 1996 Mercedes-Benz C280. However, it is still accessible from the selected car via links, so may be relevant.

The HFM-SFI system is equipped with a self-diagnostic capability for trouble shooting. Vehicles are tested reading stored Diagnostic Trouble Codes (DTCs). Diagnostic modules are now referred to as diagnostic module (OBD-II). Diagnostic information can be retrieved using a generic scan tool or Hand-Held Tester (HHT) (965 589 00 01 00) and Multiplexer Cable (965 589 00 40 00). Control module will permit testing approximately 10 seconds after engine starting procedure is completed.

scientia non olet · About Mike's Workshop Manuals