Throttle Control, Speed Control Systems -- 170 Chassis

• Basic Knowledge
  • Electronic accelerator, location/design/function - GF30.20-P-3010E
  • Pedal value sensor, location/task/design/function - GF30.20-P-4011L
    • Notes
    • Pedal value sensor position - GF30.20-P-4011-01G
    • Pedal value sensor design - GF30.20-P-4011-02A
    • Pedal value sensor design - GF30.20-P-4011-02B
    • Pedal value sensor design - GF30.20-P-4011-02C
  • Pedal value sensor characteristic curve when reversing function - GF30.20-P-4013E
  • Electronic accelerator pedal emergency running mode function - GF30.20-P-4026E
  • ME-SFI idle speed control function - GF30.22-P-0003
    • ME-SFI idle speed control function - GF30.22-P-0003E
    • ME idle speed control, function - GF30.22-P-0003GS
  • Electronic accelerator/cruise control/idle speed control actuator location/task/design/function - GF30.22-P-4010F
    • Notes
    • Electronic accelerator/cruise control/idle speed control actuator position - GF30.22-P-4010-01A
    • Electronic accelerator/cruise control/idle speed control actuator position - GF30.22-P-4010-01G
    • Electronic accelerator/cruise control/idle speed control actuator design - GF30.22-P-4010-02F
    • Electronic accelerator/cruise control/idle speed control actuator function - GF30.22-P-4010-03F
  • Throttle valve damping function - GF30.22-P-4020F
  • Throttle valve actuator, location/task/design/function - GF30.22-P-4101GS
    • Notes
    • Throttle valve actuator position - GF30.22-P-4101-01GA
    • Throttle valve actuator, function - GF30.22-P-4101-02GS
    • Throttle valve actuator design - GF30.22-P-4101-03AM
  • Cruise control (CC) function - GF30.30-P-0001FA
  • Cruise control switch, location/task/design/function - GF30.30-P-3100F
  • Kickdown switch location/task/design/function - GF30.30-P-4000A
• Safety Precautions
  • Safety information: Throttle control, cruise control system - AS30.00-Z-9999ZZ
  • Risk of injury - AS30.30-Z-0001-01A
• Trouble Diagnosis
  • Engine in limp-home mode and engine diagnosis indicator lamp is on and/or faults code P2032, P202E, P208E or P208F is stored in motor electronics control unit - AF30.20-P-2102A
• Testing & Repair
  • Adjusting throttle control - AR30.10-P-1010
    • Adjusting throttle control - AR30.10-P-1010C
    • Adjusting throttle control - AR30.10-P-1010CA
  • Removing and installing throttle control cable - AR30.10-P-3400EA
  • Remove/install accelerator pedal - AR30.12-P-1321
    • Remove/install accelerator pedal - AR30.12-P-1321D
    • Removing and installing accelerator pedal - AR30.12-P-1321GS
  • Removing and installing firewall pivot point together with accelerator pedal lever - AR30.12-P-3022B
  • Remove/install electronic accelerator actuator with flap connection - AR30.20-P-1262
    • Remove/install electronic accelerator actuator with flap connection - AR30.20-P-1262A
    • Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262GS
  • Removing and installing idle speed control (ISC) actuator - AR30.22-P-1152D
• Test & Adjustment Values
  • Mechanical regulation - BE30.10-P-1000-01A
• Maintenance
  • Lubricate joints of throttle/engine control system - AP30.10-P-3022
    • Lubricate joint areas of throttle control, inspect for ease of operation and seating of joints - AP30.10-P-3022Z
      • Notes
      • Lubricate throttle linkage joints, check for smooth operation and wear - AP30.10-P-3022-01CA
    • Lubricate joints of engine control system, check joints for freedom of movement and proper seating - AP30.10-P-3022ZA
      • Notes
      • Oil joint areas of throttle control, inspect for ease of operation and wear - AP30.10-P-3022-01CB
• Torque Specifications
  • Electronic accelerator actuator - BA30.20-P-1000-01A