Throttle Control, Speed Control Systems - 140 Chassis

• Basic Knowledge
  • Electronic accelerator - GF30.20-P-3010
    • Electronic accelerator arrangement - GF30.20-P-3010-01DA
    • Electronic accelerator design - GF30.20-P-3010-02L
    • Electronic accelerator, location/design/function - GF30.20-P-3010E
    • Electronic accelerator, position / design / function - GF30.20-P-3010F
  • EA / CC / ISC control module position / task / design / function - GF30.20-P-3020D
  • Electronic power control malfunction indicator lamp position / task / design /function - GF30.20-P-4012L
  • Idle speed control (ISC) function 9.2.98 - GF30.22-P-0002DA
    • Notes
    • Idle speed control (ISC) arrangement of components - GF30.22-P-0002-01DA
    • Idle speed control (ISC) networking of components - GF30.22-P-0002-02DA
• Testing & Repair
  • Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9104AB
  • Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9119AB
  • Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9120AB
  • Testing and repair work: Passenger cars: Throttle control, cruise control system - AR30.00-Z-9140AA
  • Adjust throttle control - AR30.10-P-1010
    • Adjust throttle control - AR30.10-P-1010D
    • Adjusting throttle control - AR30.10-P-1010EA
    • Adjusting throttle control - AR30.10-P-1010EB
    • Adjusting accelerator control - AR30.10-P-1010EC
    • Adjusting throttle control - AR30.10-P-1010F
    • Adjusting accelerator control - AR30.10-P-1010FA
    • Turning connecting rod Bell crank of right-hand steering/left-hand steering standardized - AR30.10-P-1010-01E
  • Removing and installing throttle control cable - AR30.10-P-3400
    • Removing and installing throttle control cable - AR30.10-P-3400D
    • Removing and installing throttle control cable - AR30.10-P-3400E
    • Removing and installing throttle control cable - AR30.10-P-3400EA
    • Removing and installing throttle control cable - AR30.10-P-3400F
  • Remove/install accelerator pedal - AR30.12-P-1321D
  • Removing and installing firewall pivot point with accelerator pedal lever - AR30.12-P-3022D
  • Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262
    • Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262E
    • Removing and installing electronic accelerator with throttle valve body - AR30.20-P-1262EA
    • Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262F
    • Removing and installing electronic accelerator actuator with throttle valve body - AR30.20-P-1262FA
  • Removing and installing idle speed control (ISC) actuator - AR30.22-P-1152D
• Maintenance
  • Lubricate joint areas of throttle control, inspect for ease of operation and seating of joints - AP30.10-P-3022
    • Lubricate joint areas of throttle control, inspect for ease of operation and seating of joints - AP30.10-P-3022Z
    • Lubricate joints of engine control system, check joints for freedom of movement and proper seating - AP30.10-P-3022ZA
• General Maintenance
  • Lubricate engine throttle linkage contr. shafts; check function/condition - wh3022pkw0000x(3022)
• Repair & Adjustments
  • Removing and Installing Bowden Cable - RA30001190025X(30-0025)
  • Functional description (for manual transmission version valid up to May 93) - RA30001240500X(30-500)
  • Testing with adapter - RA30001240504X(30-504)
  • Testing reference resistor - RA30001240506X(30-506)
  • Removal and installation of cruise control actuator - RA30001240541X(30-541)
  • Removal and installation of push-button switch - RA30001240545X(30-545)
  • Adjusting connecting rod or control cable - RA30001240561X(30-561)
  • Removal and installation of cruise control amplifier - RA30001240565X(30-565)
  • Removal and installation of cruise control reference resistor - RA30001240566X(30-566)
  • Removal and installation of switch on clutch pedal (up to May 93) - RA30001240575X(30-575)
  • Programmed repair - Tempomat/cruise control - RA3000124PR00X
  • Technical revisions - Cruise control/Tempomat - Models 124, 129, 140, 201 - RA3000124TA00X
  • Removal, adjustment and installation of Bowden cable - ra30006023402x(3402)
  • Electronic accelerator pedal, Tempomat cruise control/idle speed control - RA3000FLH0010X(30-0010)
  • General - RA3000TPM0000X(30-0000)
  • Brief description - RA3000TPM0002X(30-0002)
  • Location of components - RA3000TPM0004X(30-0004)
  • Function description - RA3000TPM0006X(30-0006)
  • Individual functions - RA3000TPM0008X(30-0008)
  • Notes on towing as well as test and adjustment work - RA3000TPM0010X(30-0010)
  • Wiring diagrams (30-580)
    • Wiring diagrams - RA30011240580X(30-580)
    • Wiring diagrams - RA300A1240580X(30-580)
  • Removing and Installing Accelerator Pedal - ra300b6021321x(1321)
  • Removing and Installing Firewall Bearing for Accelerator Pedal Lever - ra300c6023022x(3022)
  • Accelerator Control Linkage (1010)
    • D. Adjusting Accelerator Control Linkage - ra300d6021010x(1010)
    • Setting the accelerator control - ra30lh1041010x(1010)
  • Removal and installation of electronic accelerator actuator with the throttle valve assembly - ra30lh1041262x(1262)
  • Removal and installation of control unit for electronic accelerator pedal Tempomat cruise control/idle speed control (LLR) idle speed control (LLR) - ra30lh1041272x(1272)
  • Removal and installation of accelerator pedal - ra30lh1041321x(1321)
  • Removal and installation of firewall bearing with accelerator pedal lever - ra30lh1043022x(3022)
  • Removal and installation of Bowden cable - ra30lh1043402x(3402)
  • Technical modifications: Accelerator control - ra30lh104ta00x
• Component Modifications
  • Bell crank of right-hand steering/left-hand steering standardized - BT30.10-P-0001-01A
  • Return spring between fulcrum lever and accelerator control lever modified - BT30.10-P-0002-01A
  • Locking element for accelerator pedal lever modified - BT30.12-P-0001-01A