Technical Service Bulletins

A/C Compressor
- Air Conditioning Not Cooling / Leak Test Using Fluorescent Dye (LI83.00-P-045023)
- Factory Approved Service Products (S-0473-08B)
- Conversion Of A/C System From R-12 To R-134A (83/83)
- Remanufactured NIPPONDENSO A/C Compressors & Clutch (83/53)
- Factory Approved Service Products (00/53)
- Bear Electronic Leak Detector For R12 & R134A (83/49A)
- A/C Servicing & Recycling Regulations (83/45)
- Warning Against Use Of "ALASKANKOOL R-176" (83/37)
- Refrigerant Recycle Machine For R-12 A/C Systems (83/72A)
- Modified A/C Compressor DELCO R 4 - Seal Replacement (83/60)
- Factory-Approved Service Products - All Models (00/31A)
- A/C System Service Procedures (83/50)
- Special Tool For A/C Compressor TENSIONING Pulley (58/62)
Accessories & Equipment
- Handling Lead-Free Filling Solder (60.00/22)
- Multi-Grade Metal Grease (00.45/94)
Accessories Control Systems
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
- Improved Diagnostic Plug Connector Housing For Star Diagnosis (58.40/112)
- Year 2000 Problem And Its Impact On Vehicle Software (00.00/68)
- Fluke Digital MULTIMETER Operation Safety Notice (58.30/105)
- Multiplex Cable (965 589 00 40 XX) Pin Breakage (DTB 33/95-2; MB-NET 620)
- Unnecessary Replacement Of SRS Control Unit (91/23)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
Air Bag, SRS
- Code 9077 "VIN'S In Control Modules N2/7 And N73 Are Not Identical" Current And Stored After Installing New Ab Module (TT 01/11-J)
- Airbag Durability And Reliability (91.60/193)
- Technicians Using Star Diagnosis Systems During A Road Test (91.00/47)
- Replacement Of Airbag Control Module (DTB 16/01; MB-NET 142)
- Airbag Unit Replacement Label And Replacement Date Label Inserts (91/48A)
- Replacement Driver Airbag - Two Types (91/45)
- Modified SRS Control Unit - Revised SRS Test Card (91/43)
- Electronic Malfunction Caution - Do Not Repair (54/23)
- Aftermarket Accessory Caution - Don't Move SRS Sensor (91/13)
Anti-Lock Brakes
- Replacement Of Safety-Related Harnesses (54/36)
- Antilock Brake System Test Procedures (42/6)
- Electronic Malfunction Caution - Do Not Repair (54/23)
- Park Brake Switch Location/Abs Sensor Cable Routing (42/3)
Anti-Theft Systems
- Warranty Key Returns (LI80.35-P-045746)
- All Outer Door Panels Being Replaced By Door Shell (72/10)
- Engine Hood Hinge Inspection Procedure (88/32)
- Anti-Theft Alarm Tester With Memory (82/42)
- Anti-Theft/Anti-Towing Alarm Fault - Sensor Deletion (82/27)
- Door Lock And/Or Alarm System Problems (82/25)
- Modified Anti-Theft Alarm Connection & Control Unit (82/24A)
Automatic Trans
- Lubricating Oil Analysis Information (LI01.00-P-068886)
- Compatibility Of Transmission Fluids "Gold," "Red," & "Blue" (TT 07/14-C)
- Factory Approved Service Products (S-0473-08B)
- Preliminary Approval Of The Following DEXRON III Automatic Transmission Fluids (DTB 25/95-2; MB-NET 470)
- Fixture For B-1 Piston R & I - Auto Trans.722.3/4/5 (58/84)
- Exchange Transmission - Modified Piston Seal Ring (27/96)
- Installation & Use Of Self-Tapping Fasteners (00/126)
- 722.3/4/5 - Technical Innovations & Modifications (27/95)
- 722.3/4/5 - Sealing Plugs For Vacuum Actuators (27/94)
- Factory Approved Service Products (00/53)
- 722.3/4/5 - Modified Automatic Trans. Fluid Dipstick (27/92)
- 722.5/722.3 Trans - Brake Band Piston Modified Parts (27/85A)
- Auto Trans 722.3 & 722.5: Modified Vacuum Modulator (27/90)
- Unnecessary Testing Of Modulating Pressure (27/89)
- High D-R Shift Effort - INSALL New BELLEVILLE Washer (27/10C)
- Internal Engine Cleaning Products - Not Recommended (00/39)
- Factory-Approved Service Products - All Models (00/31A)
- Component VIN Labeling Requirements (00/28A)
Auxiliary Emission Control Systems
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
- Replacement Emission Control Labels And VIN Tags For Vehicles (00.00/72)
- Improved Diagnostic Plug Connector Housing For Star Diagnosis (58.40/112)
- HERMANN Electronics Diagnostic Engine Analyzers (58.40/104)
- Year 2000 Problem And Its Impact On Vehicle Software (00.00/68)
- Fluke Digital MULTIMETER Operation Safety Notice (58.30/105)
- I/M 240 Emission Testing On Dynamometer (14/12A)
- Fluke Meter Approved For Standard Equipment Program (58/87A)
- Multiplex Cable (965 589 00 40 XX) Pin Breakage (DTB 33/95-2; MB-NET 620)
- Vehicle Emission Control System Tampering (00/50)
- 2.3/2.6/4.2/5.6L Eng Oxygen Sensor Replacement Info (07.3/11)
- Catalytic Converter Replacement: Do Not Use Old Ones (14/4)
- ADAPTOR Cable For Compression Pressure Recorder (58/68)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
- Downhill Surge - New Cruise Control Amplifier (54/42)
- Electro-Hydraulic Actuator Testing/Replacement Info (07.3/6)
Axle Shafts
- Cleaning Axle Hubs When Installing Brake Discs (42.10/123A)
- Pulling Rear Hub With New Removal/Installation Tool (35/76)
- 2.5/2.6/3.0/3.2/4.2/5.0L Eng - Flex Disc Check (41/1C)
Blowers, Superchargers & Turbochargers
- Fluke Meter Approved For Standard Equipment Program (58/87A)
Body Electrical
- Wiring Damage On More Than 10 Wires (LI54.18-P-072022)
Body Interior
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
- Year 2000 Problem And Its Impact On Vehicle Software (00.00/68)
- Fluke Digital MULTIMETER Operation Safety Notice (58.30/105)
- Multiplex Cable (965 589 00 40 XX) Pin Breakage (DTB 33/95-2; MB-NET 620)
- Unnecessary Replacement Of SRS Control Unit (91/23)
- NIPPONDENSO Compressor Related Complaints & Tests (83/67)
- Collision Repair - Ecu Replacement Indications (00/61)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
Brakes Control Systems
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
- Improved Diagnostic Plug Connector Housing For Star Diagnosis (58.40/112)
- Year 2000 Problem And Its Impact On Vehicle Software (00.00/68)
- Multiplex Cable (965 589 00 40 XX) Pin Breakage (DTB 33/95-2; MB-NET 620)
- Replacement Of Safety-Related Harnesses (54/36)
- Antilock Brake System Test Procedures (42/6)
- Electronic Malfunction Caution - Do Not Repair (54/23)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
- Park Brake Switch Location/Abs Sensor Cable Routing (42/3)
Communication Devices
- Fm Interference Noise (Not Related To Ignition Or Alternator Noise) (LI82.60-P-065256)
- Aftermarket Electrical Accessories Installation (54/35)
Cooling System (Mechanical)
- Factory Approved Service Products (S-0473-08B)
- Fluke Meter Approved For Standard Equipment Program (58/87A)
- Engine Cooling System Maintenance (20/9)
- Oil Filter O-Ring Seal/Gasket - Information (18/10)
- Factory-Approved Service Products - All Models (00/31A)
- Modified Coolant Expansion Tank Cap (20/38)
- Idle Mixture Adjustment Tower With Steel Plug (07.3/7)
Cruise Control Systems
- Cruise Control Reference Resistor Expanded Scope (54/54)
- Downhill Surge - New Cruise Control Amplifier (54/42)
Differentials & Drive Axles
- Lubricating Oil Analysis Information (LI01.00-P-068886)
- Factory Approved Service Products (S-0473-08B)
- Factory Approved Service Products (00/53)
- 2.5/2.6/3.0/3.2/4.2/5.0L Eng - Flex Disc Check (41/1C)
- Internal Engine Cleaning Products - Not Recommended (00/39)
- Factory-Approved Service Products - All Models (00/31A)
Driveshaft & Universal Joints
- Humming/Howling/Droning Noise From Drivetrain (LI28.00-P-060078)
- 2.5/2.6/3.0/3.2/4.2/5.0L Eng - Flex Disc Check (41/1C)
Electronic Steering
- Caster Gauge Modification - Aligning Pin Bushings (58/52)
Electronic Suspension
- Caster Gauge Modification - Aligning Pin Bushings (58/52)
Engine Control Systems
- Use Of E10 Fuel (47.00/61)
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
- Return Delivery Of Fuel System Parts (47.00/58)
- Factory Approved Service Products (S-0473-08B)
- Improved Diagnostic Plug Connector Housing For Star Diagnosis (58.40/112)
- Mass Air Flow Sensors Damaged By Particles (DTB 40/99-2, MB-NET 486)
- Fuel Filter Must Be Visually Checked For Damage (DTB 39/99-2; MB-NET 479)
- HERMANN Electronics Diagnostic Engine Analyzers (58.40/104)
- Year 2000 Problem And Its Impact On Vehicle Software (00.00/68)
- Fluke Digital MULTIMETER Operation Safety Notice (58.30/105)
- Use Of Portable DEFUELER/REFUELER Tanker (58/99)
- Fluke Meter Approved For Standard Equipment Program (58/87A)
- Multiplex Cable (965 589 00 40 XX) Pin Breakage (DTB 33/95-2; MB-NET 620)
- Reformulated Gasoline (DTB 01/95-2)
- Reformulated Gasoline (01/95-2)
- 2.3/2.6/4.2/5.6L Eng Oxygen Sensor Replacement Info (07.3/11)
- ADAPTOR Cable For Compression Pressure Recorder (58/68)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
- Downhill Surge - New Cruise Control Amplifier (54/42)
- Electro-Hydraulic Actuator Testing/Replacement Info (07.3/6)
Entertainment Systems
- Cellular Telephone System Diagnosis & Return Form (82/108)
- BECKER Post-Warranty Factory Direct Radio Repair (82/37C)
- Liquid Damage In Post-Warranty Radios (82/68)
- BECKER Two-Piece Radio Error Codes (82/58)
- Aftermarket Electrical Accessories Installation (54/35)
- BECKER Radio Code Key (82/49)
- RECODING BECKER Radios (82/42)
- Aftermarket Installation Of Removable Radio Kits (82/41)
- Servicing Radios With Missing/Altered Serial Numbers (82/38)
- BECKER Radio Exchange - USA/NONUSA Service Info (82/28)
- Modified Anti-Theft Alarm Connection & Control Unit (82/24A)
Exhaust
- Humming/Howling/Droning Noise From Drivetrain (LI28.00-P-060078)
- The Care Of Chrome Tail Pipe Finishers (49.10/11)
- Fluke Meter Approved For Standard Equipment Program (58/87A)
- Catalytic Converter Replacement: Do Not Use Old Ones (14/4)
Exterior Body Panels
- Introduction Of Two-Component Epoxy Body Filler (60.00/23)
- Dedicated Straightening Equipment For Collision Repair (60/04E)
- Multi-Grade Metal Grease (00.45/94)
- Approved PAINTLESS Dent Repair (PDR) (60.00/13)
- All Outer Door Panels Being Replaced By Door Shell (72/10)
- MULTISPOT M83 Resistance Spot Welder (60.00/08B)
- MULTISPOT M20 Resistance Welder (60.00/12)
- Use Of Portable DEFUELER/REFUELER Tanker (58/99)
- Restriction Sleeve In Fuel Filler Neck - Gas Models (47/3A)
- Trunk Lid Rattle (88/9)
Exterior Lights
- Headlamps/Front Fog Lamps Leaking Or Fogged (LI82.10-P-050139)
- Correct Bulb Usage - Overheated Bulb Socket (82/75)
- Headlamp Aiming Equipment (58/34)
Frames, Subframes & Crossmembers
- Dedicated Straightening Equipment For Collision Repair (60/04E)
- Corrosion Protection Without Hexavalent Chromium VI (97.30/05)
- MULTISPOT M83 Resistance Spot Welder (60.00/08B)
- MULTISPOT M20 Resistance Welder (60.00/12)
- Model 107 CELETTE Straightening Set Modification (58/54)
Front Suspension
- Assembly Of Suspension Struts And Shock Absorbers (32.25/83)
- Corrosion Protection Without Hexavalent Chromium VI (97.30/05)
- Vehicle Wheel Alignment Equipment Compliance (58.30/45A)
- New 3-Lug Spring Compressor (58/54A)
- Suspension - 2-Lug & 3-Lug Spring Compressors (58/76)
- New Universal Spring Compressor (58/56)
- New Wheel Alignment Pull Fixture & Specifications (40/69)
- Caster Gauge Modification - Aligning Pin Bushings (58/52)
- New Universal Suspension Spring Compressor (58/42)
Fuel System
- Use Of E10 Fuel (47.00/61)
- Return Delivery Of Fuel System Parts (47.00/58)
- Factory Approved Service Products (S-0473-08B)
- Mass Air Flow Sensors Damaged By Particles (DTB 40/99-2, MB-NET 486)
- Fuel Filter Must Be Visually Checked For Damage (DTB 39/99-2; MB-NET 479)
- Use Of Portable DEFUELER/REFUELER Tanker (58/99)
- Fluke Meter Approved For Standard Equipment Program (58/87A)
- Reformulated Gasoline (DTB 01/95-2)
- Reformulated Gasoline (01/95-2)
- All Models With Cis-E - Fuel Distributor Leakage (07.3/18)
- Return Of Fuel System Components To MBNA (00/41A)
- Fuel Additives For MERCEDES-BENZ Engines (00/38)
- Factory-Approved Service Products - All Models (00/31A)
Fuses & Circuit Breakers
- Wiring Damage On More Than 10 Wires (LI54.18-P-072022)
- SRS Wiring Harness Repair/Ordering Procedure (91.60/37)
- Replacement Of Safety-Related Harnesses (54/36)
- Fuel Pump Inoperative - Check/Replace Relay (54/18)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
Gauges & Instrument Panels
- Checking Electronic Speedometers Before Replacement (54/39)
- Operation & Testing Of Low Oil Level Indicator (18/41)
- Anti-Theft/Anti-Towing Alarm Fault - Sensor Deletion (82/27)
General Servicing
- Bear Electronic Leak Detector For R12 & R134A (83/49A)
- A/C Servicing & Recycling Regulations (83/45)
Hazardous Waste Material
- Fluke Meter Approved For Standard Equipment Program (58/87A)
Headlights
- Headlamps/Front Fog Lamps Leaking Or Fogged (LI82.10-P-050139)
- Correct Bulb Usage - Overheated Bulb Socket (82/75)
- Headlamp Aiming Equipment (58/34)
Hoist/Jack
- Fluke Meter Approved For Standard Equipment Program (58/87A)
Horns
- Inoperative Horn - Contact Adjustment Screw Process (82/62)
HVAC Control Systems
- Air Conditioning Not Cooling / Leak Test Using Fluorescent Dye (LI83.00-P-045023)
- Factory Approved Service Products (S-0473-08B)
- Conversion Of A/C System From R-12 To R-134A (83/83)
- Remanufactured NIPPONDENSO A/C Compressors & Clutch (83/53)
- Factory Approved Service Products (00/53)
- Bear Electronic Leak Detector For R12 & R134A (83/49A)
- A/C Servicing & Recycling Regulations (83/45)
- Installation Of Aftermarket Air Filtration System (83/46)
- A/C Performance Test (83/30)
- Warning Against Use Of "ALASKANKOOL R-176" (83/37)
- Refrigerant Recycle Machine For R-12 A/C Systems (83/72A)
- NIPPONDENSO Compressor Related Complaints & Tests (83/67)
- Modified A/C Compressor DELCO R 4 - Seal Replacement (83/60)
- Factory-Approved Service Products - All Models (00/31A)
- Mildew Odor During Air Conditioner Operation (83/58)
- A/C System Service Procedures (83/50)
- Special Tool For A/C Compressor TENSIONING Pulley (58/62)
Identification
- Replacement Emission Control Labels And VIN Tags For Vehicles (00.00/72)
- Airbag Unit Replacement Label And Replacement Date Label Inserts (91/48A)
Ignition System
- Fluke Meter Approved For Standard Equipment Program (58/87A)
- 5/8" & 13/16" Spark Plug Wrench Tool (58/53)
- Revised Injection Valve Test (07.3/14)
- New Spark Plug Connector Removal Pliers (58/78)
- Gas Models Ignition Wire Terminals - Crimping (15/42)
- Idle Mixture Adjustment Tower With Steel Plug (07.3/7)
Infotainment
- Poor Radio Reception (DTB 05/00; MB-NET 021)
Interior/Exterior Trim
- Multi-Grade Metal Grease (00.45/94)
- The Care Of Chrome Tail Pipe Finishers (49.10/11)
- Service Kit For Rectifying Squeaking, Creaking And Tearing Noises (00.45/77)
- Installation & Use Of Self-Tapping Fasteners (00/126)
- 6-Hole Wheel Covers For 15 Inch Wheels (40/127)
- Engine Hood Hinge Inspection Procedure (88/32)
Interior/Illumination Lights
- Correct Bulb Usage - Overheated Bulb Socket (82/75)
Lubrication System
- Lubricating Oil Analysis Information (LI01.00-P-068886)
- Factory Approved Service Products (S-0473-08B)
- Oil SLUDGING In Gasoline Engines (18.00/16A)
- Approved Oil Evacuation Equipment (58.00/118)
- Oil Extraction Equipment Explanation/Ordering Info (58/95)
- Fluke Meter Approved For Standard Equipment Program (58/87A)
- Engine Oil Level - Do Not Overfill (00/57A)
- Factory Approved Service Products (00/53)
- Operation & Testing Of Low Oil Level Indicator (18/41)
- Engines With Break-In Oil - Check Engine Oil Level (00/81)
- Oil Filter O-Ring Seal/Gasket - Information (18/10)
- Internal Engine Cleaning Products - Not Recommended (00/39)
- Factory-Approved Service Products - All Models (00/31A)
- Idle Mixture Adjustment Tower With Steel Plug (07.3/7)
Manual Steering
- Evaluating Play In Rack-And-Pinion Steering (LI46.20-P-071904)
- Factory Approved Service Products (S-0473-08B)
- Modified Power Steering Pump Fluid Level Indication (46/75)
- Unnecessary Replacement Of Power Steering Pumps (46/65)
- Factory-Approved Service Products - All Models (00/31A)
Manual Trans
- Factory Approved Service Products (S-0473-08B)
- Factory Approved Service Products (00/53)
- Factory-Approved Service Products - All Models (00/31A)
Mechanical
- Humming/Howling/Droning Noise From Drivetrain (LI28.00-P-060078)
- Engine Diagnosis (TT 02/11-A)
- Engine HYDROLOCK Repairs / Diagnosis (TT 02/11-B)
- Factory Approved Service Products (S-0473-08B)
- Reminder - Use Of BORESCOPE Or FIBERSCOPE As Workshop Equipment (DTB 16/97-2, MB-NET 195)
- Service Information Regarding The Assessment Of Cylinder Walls Of Engines With Aluminum Alloy Crankcase (01/30)
- Oil SLUDGING In Gasoline Engines (18.00/16A)
- Approved Oil Evacuation Equipment (58.00/118)
- Mass Air Flow Sensors Damaged By Particles (DTB 40/99-2, MB-NET 486)
- Oil Extraction Equipment Explanation/Ordering Info (58/95)
- Rebuilding Light-Alloy Engine With ALLUMINUM Sleeves (01/9B)
- Fluke Meter Approved For Standard Equipment Program (58/87A)
- Installation & Use Of Self-Tapping Fasteners (00/126)
- Coding Of Crankshaft Main Bearing Shells & Tolerance (03/4A)
- Timing Chain Noise When Starting Engine (05/87)
- All Engines - Installation Of Cylinder Head Bolts (01/6)
- Valve Guide Exchange - All Engines (05/4)
- Revised Injection Valve Test (07.3/14)
- Oil Filter O-Ring Seal/Gasket - Information (18/10)
- Internal Engine Cleaning Products - Not Recommended (00/39)
- Idle Mixture Adjustment Tower With Steel Plug (07.3/7)
- Compression Recorders With Quick-Release Connections (58/47)
- Installation Of Ring Gear & FLEXPLATES (15/35)
- Component VIN Labeling Requirements (00/28A)
Mechanical - Hydraulic
- Vibration Or Noise When Braking (LI42.10-P-061801)
- Diagnosing Complaints Of Brake Pulsation (TT 06/15-O)
- Cleaning Axle Hubs When Installing Brake Discs (42.10/123A)
- Brake Lining Installation Instructions (42.10/117A)
- Brake Pad Paste Usage (42.10/110)
- Self-Locking Brake Caliper Bolt Replacement (42.10/111)
- Corrosion Of Brake Components (42.10/109)
- Factory Approved Service Products (S-0473-08B)
- Using Brake Disc Caliper/Gauge: MB Special Tool 140 589 00 19 00 (58.00/002)
- REMACHINING Brake Discs (DTB 18/96-4; MB-NET 329)
- Brake Lathe Approved For Standard Equipment Program (58/85)
- Revised Anti-Corrosion Coating On Brake Discs (42/127)
- Factory Approved Service Products (00/53)
- Front Brake Pads - Two Different Versions (42/13)
- Correct Brake Pad Applicability Tables (42/8)
- Internal Engine Cleaning Products - Not Recommended (00/39)
- Factory-Approved Service Products - All Models (00/31A)
- Machining Brake Discs (42/4)
Memory Modules
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
Mirrors
- Warranty Claims For Outside Rear View Mirrors (88/11)
Paint & Coatings
- Introduction Of Two-Component Epoxy Body Filler (60.00/23)
- MBUSA Approved Refinishing Products (98.00/13V)
- Factory Approved Service Products (S-0473-08B)
- Approved PAINTLESS Dent Repair (PDR) (60.00/13)
- MBNA Approved Refinishing Products (98/13C)
- Vehicle Paint Damage Due To Environmental Fallout (98/11)
- New Paint Material "Ms Filler": MB Paint System (98/28)
- New "MB-Polish" Availability (98/27)
- Paint Polishing (98/4)
- Anti-Corrosion Spray Near Auto Seat Belt Retractor (97/1)
- M-B Metal Dust Remover (98/23)
- Applying PVC Undercoating & Seam Sealer (97/15)
Parking Brake System
- Park Brake Switch Location/Abs Sensor Cable Routing (42/3)
Passive Restraints
- Dirty Seats (LI91.18-P-045700)
- Repairs For Noise Complaints Regarding Seats (91.00/37)
Rear Suspension
- Assembly Of Suspension Struts And Shock Absorbers (32.25/83)
- Repairing Self-Locking Threaded Axle Mount Connections (35.00/08)
- Corrosion Protection Without Hexavalent Chromium VI (97.30/05)
- New 3-Lug Spring Compressor (58/54A)
- Pulling Rear Hub With New Removal/Installation Tool (35/76)
- Suspension - 2-Lug & 3-Lug Spring Compressors (58/76)
- New Universal Spring Compressor (58/56)
- New Wheel Alignment Pull Fixture & Specifications (40/69)
- Caster Gauge Modification - Aligning Pin Bushings (58/52)
- New Universal Suspension Spring Compressor (58/42)
Restraints Control Systems
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
- Code 9077 "VIN'S In Control Modules N2/7 And N73 Are Not Identical" Current And Stored After Installing New Ab Module (TT 01/11-J)
- Airbag Durability And Reliability (91.60/193)
- Technicians Using Star Diagnosis Systems During A Road Test (91.00/47)
- Replacement Of Airbag Control Module (DTB 16/01; MB-NET 142)
- Improved Diagnostic Plug Connector Housing For Star Diagnosis (58.40/112)
- Year 2000 Problem And Its Impact On Vehicle Software (00.00/68)
- Fluke Digital MULTIMETER Operation Safety Notice (58.30/105)
- Multiplex Cable (965 589 00 40 XX) Pin Breakage (DTB 33/95-2; MB-NET 620)
- Unnecessary Replacement Of SRS Control Unit (91/23)
- Replacement Driver Airbag - Two Types (91/45)
- Modified SRS Control Unit - Revised SRS Test Card (91/43)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
Schedule
- Inspection Service Intervals (00/44)
Seats
- Dirty Seats (LI91.18-P-045700)
- Repairs For Noise Complaints Regarding Seats (91.00/37)
- SRS Wiring Harness Repair/Ordering Procedure (91.60/37)
- New Dye For Soft Leather Seat Covers (91/21)
- Excessive Motion Of Seat Backrest (91/17)
- Re-Dyeing Leather Seat Covers (98/15)
- Electronic Malfunction Caution - Do Not Repair (54/23)
- SEATBELT System Inspection/Repairs (91/16)
- Child Seat Installation - Anchors/Latch Plates (91/4A)
Starter
- Charge Battery (54.10/255)
- New Required Replacement MIDTRONICS Battery Tester; Special Tool: 165-Exp 717 Kit (58.20/155)
- MIDTRONICS Battery Charger 165-PSC-550KIT (58.40/148)
- Upgrade Program For The MBUSA Special Tool: 900 589 09 21 00; MIDTRONICS Battery Tester (MRC 717) (58.20/146A)
- New Battery Test Procedure, Using MIDTRONICS MCR 717 Battery (58.00/124A)
- Fluke Meter Approved For Standard Equipment Program (58/87A)
- Battery Jump-Starting And Charging (54/40A)
- Battery Care - Service Information (54/38)
- Unnecessary Replacement Of Alternators (15/48)
- Idle Mixture Adjustment Tower With Steel Plug (07.3/7)
Steering Column
- Caster Gauge Modification - Aligning Pin Bushings (58/52)
Steering Control Systems
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
- Factory Approved Service Products (S-0473-08B)
- Improved Diagnostic Plug Connector Housing For Star Diagnosis (58.40/112)
- Year 2000 Problem And Its Impact On Vehicle Software (00.00/68)
- Multiplex Cable (965 589 00 40 XX) Pin Breakage (DTB 33/95-2; MB-NET 620)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
Steering Gear
- Factory Approved Service Products (S-0473-08B)
- Replacing Steering Gear After An Accident (46/57)
Steering Linkage
- Vehicle Wheel Alignment Equipment Compliance (58.30/45A)
- Replacing Steering Gear After An Accident (46/57)
- Pulling Rear Hub With New Removal/Installation Tool (35/76)
- New Wheel Alignment Pull Fixture & Specifications (40/69)
- Caster Gauge Modification - Aligning Pin Bushings (58/52)
Sun Roof/T-Top/Convertible Top
- Soft Top Cleaning - Proper Procedure (77/37)
- Engine Hood Hinge Inspection Procedure (88/32)
- Warranty Replacement Of Soft Top (77/2)
- Corrosion Protection Improvements & Hardtop Repair (97/2)
- Soft Top Storage Compartment Lid Modification (77/1A)
Suspension Control Systems
- Assembly Of Suspension Struts And Shock Absorbers (32.25/83)
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
- Improved Diagnostic Plug Connector Housing For Star Diagnosis (58.40/112)
- Year 2000 Problem And Its Impact On Vehicle Software (00.00/68)
- Multiplex Cable (965 589 00 40 XX) Pin Breakage (DTB 33/95-2; MB-NET 620)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
- Caster Gauge Modification - Aligning Pin Bushings (58/52)
System
- Use Of E10 Fuel (47.00/61)
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
- Return Delivery Of Fuel System Parts (47.00/58)
- Factory Approved Service Products (S-0473-08B)
- Replacement Emission Control Labels And VIN Tags For Vehicles (00.00/72)
- Improved Diagnostic Plug Connector Housing For Star Diagnosis (58.40/112)
- Mass Air Flow Sensors Damaged By Particles (DTB 40/99-2, MB-NET 486)
- Fuel Filter Must Be Visually Checked For Damage (DTB 39/99-2; MB-NET 479)
- HERMANN Electronics Diagnostic Engine Analyzers (58.40/104)
- Year 2000 Problem And Its Impact On Vehicle Software (00.00/68)
- Fluke Digital MULTIMETER Operation Safety Notice (58.30/105)
- Use Of Portable DEFUELER/REFUELER Tanker (58/99)
- I/M 240 Emission Testing On Dynamometer (14/12A)
- Fluke Meter Approved For Standard Equipment Program (58/87A)
- Multiplex Cable (965 589 00 40 XX) Pin Breakage (DTB 33/95-2; MB-NET 620)
- Reformulated Gasoline (DTB 01/95-2)
- Reformulated Gasoline (01/95-2)
- Vehicle Emission Control System Tampering (00/50)
- 5/8" & 13/16" Spark Plug Wrench Tool (58/53)
- All Models With Cis-E - Fuel Distributor Leakage (07.3/18)
- Return Of Fuel System Components To MBNA (00/41A)
- Revised Injection Valve Test (07.3/14)
- New Spark Plug Connector Removal Pliers (58/78)
- Oil Filter O-Ring Seal/Gasket - Information (18/10)
- 2.3/2.6/4.2/5.6L Eng Oxygen Sensor Replacement Info (07.3/11)
- Catalytic Converter Replacement: Do Not Use Old Ones (14/4)
- Gas Models Ignition Wire Terminals - Crimping (15/42)
- Fuel Additives For MERCEDES-BENZ Engines (00/38)
- ADAPTOR Cable For Compression Pressure Recorder (58/68)
- Factory-Approved Service Products - All Models (00/31A)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
- Idle Mixture Adjustment Tower With Steel Plug (07.3/7)
- Downhill Surge - New Cruise Control Amplifier (54/42)
- Electro-Hydraulic Actuator Testing/Replacement Info (07.3/6)
Towing
- Fluke Meter Approved For Standard Equipment Program (58/87A)
Transfer Case
- Factory Approved Service Products (S-0473-08B)
- Factory Approved Service Products (00/53)
- Factory-Approved Service Products - All Models (00/31A)
Transmission Control Systems
- Preventing Damage To Electronic Components Due To Electrostatic Discharge (54.00/238)
- Improved Diagnostic Plug Connector Housing For Star Diagnosis (58.40/112)
- Year 2000 Problem And Its Impact On Vehicle Software (00.00/68)
- Fluke Digital MULTIMETER Operation Safety Notice (58.30/105)
- Multiplex Cable (965 589 00 40 XX) Pin Breakage (DTB 33/95-2; MB-NET 620)
- Unnecessary Testing Of Modulating Pressure (27/89)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)
Warning Systems
- Inoperative Horn - Contact Adjustment Screw Process (82/62)
Wheel Alignment
- Vehicle Wheel Alignment Equipment Compliance (58.30/45A)
- New Wheel Alignment Pull Fixture & Specifications (40/69)
- Caster Gauge Modification - Aligning Pin Bushings (58/52)
Wheel Hubs
- Cleaning Axle Hubs When Installing Brake Discs (42.10/123A)
- Pulling Rear Hub With New Removal/Installation Tool (35/76)
Wheels & Tire System
- Center Caps On The Wheels May Have Surface Damage, Corrosion, Or Fading (LI40.10-P-068659)
- Cleaning Axle Hubs When Installing Brake Discs (42.10/123A)
- Checking Components For Bolted Wheel Connection (40.10/72)
- Corrosion Of Brake Components (42.10/109)
- Approved Alkaline MB Wheel Cleaner For Light Alloy Disk Wheel (40.10/66)
- Nitrogen Use In Tire Inflation (40.10/60)
- Chrome Plating Of MERCEDES-BENZ Light Alloy Wheels (40/18)
- MICHELIN Pilot Sport A/S Tires (40.10/43A)
- New & Updated Wheel Balancer Flange Plate & Centering Adapters (58/82A)
- Tires - Proper Maintenance And Inspection (40.10/36)
- Storage Of Vehicles Equipped With High Performance Tires (40.10/34)
- Factory-Approved Summer/All-Season/Winter Tires (40/20M)
- Drivetrain Noise & Vibration (41/18)
- Pulling Rear Hub With New Removal/Installation Tool (35/76)
- 6-Hole Wheel Covers For 15 Inch Wheels (40/127)
- Removal Tool For Adhesive Wheel Balance Weights (58/50)
- Aerosol Tire Inflator/Sealer Flammability Hazard (40/16)
- Tire Damage Caused By Pressure Washer (40/99)
- Factory Approved Winter Tires Reference Chart (40/15)
- Approved 15 Inch Summer Tires (40/7)
- Approved Summer & Winter Tires For 14" Rims (40/9)
- Modified Weight Progression Of Wheel Balance Weights (40/85)
- Lug Bolt Locks 15 Inch Light Allow Wheels (40/77)
- New Hex Socket For Wheel Bolts (40/63A)
- Approved Summer & Winter Tires/Rims/Chains (40/5A)
Window Motors & Regulators
- Introduction Of Improved Single-Component Windshield/Window Bonding System (67.10/27)
- New Window Glazing One-Component Adhesive Repair Kit (67.00/25)
- Damage To Laminated Glass Due To Chips Or Cracks (67/02)
- Poor Radio Reception (DTB 05/00; MB-NET 021)
- New MB Windshield Washer Concentrate (82.35/113A)
- Engine Hood Hinge Inspection Procedure (88/32)
- Window Adjustment (Sequence & Procedure) (94/1)
Wiper/Washer Systems
- Windshield Washer System: Maintaining Wiping Quality And Controlling Noise (82.35/621A)
- Factory Approved Service Products (S-0473-08B)
- New MB Windshield Washer Concentrate To Improve Windshield Cleaning (DTB 23/98-2; MB-NET 478)
- Resolving Windshield Wiper Smearing Complaints (82/67)
- Windshield Washer Nozzle Clogging - New Nozzle (82/46)
- Windshield Washer Clogging - New Connector (82/55)
- Mixing Windshield Washer Fluid With Concentrate "S" (82/23A)
Wiring System (Data Link Connectors, Pwr Dist., Grnd Dist.)
- SRS Wiring Harness Repair/Ordering Procedure (91.60/37)
- Replacement Of Safety-Related Harnesses (54/36)
- OVERVOLTAGE Protection Relay - Engine Wiring Harness (54/45)