DTC U0336-00: SAS Control Module Error

U0336-00: (PCM (SKYACTIV-G)) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	SAS control module error
Detection condition	Any one of the following conditions is met: CAN communication line malfunction between SAS control module and PCM There is a malfunction in the SAS control module.
Fail-safe	Not applicable
Possible cause	DTCs are stored in the following modules. (CAN driver malfunction) SAS control module (See DTC TABLE [SAS] .) PCM (other than U0336-00:) (See DTC TABLE [PCM (SKYACTIV-G)] .) SAS control module connector or terminal malfunction (See CONNECTOR INSPECTION .) PCM connector or terminal malfunction (See CONNECTOR INSPECTION .) SAS control module malfunction (Refer to SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.] in service information.) PCM malfunction (Refer to PCM REMOVAL/INSTALLATION [SKYACTIV-G 2.0] in service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .) Perform the KOEO or KOER self test. (See DTC INSPECTION .)
System wiring diagram	Not applicable