DTC U0151-00: Can Communication System: Communication Error To SAS Control Module

U0151-00: (DCDC) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	CAN communication system: Communication error to SAS control module
Detection condition	The DC-DC converter (i-ELOOP) detects a communication error with the SAS control module.
Fail-safe	Not applicable
Possible cause	Malfunction in CAN communication line between SAS control module and DC-DC converter (i-ELOOP) NOTE: Perform the malfunction diagnosis according to the troubleshooting procedure for the multiplex communication system. (See MALFUNCTION DIAGNOSIS FLOW [CONTROLLER AREA NETWORK (CAN)] .) SAS control module malfunction (Refer to SAS CONTROL MODULE REMOVAL/INSTALLATION [TWO-STEP DEPLOYMENT CONTROL SYSTEM - US/CANADA SPEC.] in service information.) DC-DC converter (i-ELOOP) malfunction (Refer to applicable [REMOVAL/INSTALLATION] in service information.)
Repeatability verification procedure	Not applicable
System wiring diagram	Not applicable