Snapshot Data Table [ECL]
SNAPSHOT DATA (ECL)
| Snapshot data item | Unit | Data contents |
|---|---|---|
| AMB_TEMP | °C, °F | Ambient temperature |
| APP | % | Accelerator pedal position status |
| BRK_SW | Not Stepping/Stepping | Brake pedal position status |
| ECT | °C, °F | Engine coolant temperature |
| ENG_RPM | rpm | Engine speed status |
| ENG_RUN_TIME | Second | Total operating time since ignition is switched ON (engine on)/main power is switched ON (READY on) |
| GLOBAL_REAL_TIME | min | Accumulated total elapsed time since vehicle completion until selector lever detects a DTC |
| HV_BATT_SOC | % | High voltage battery charging rate |
| IG_ON_TIMER | Min | Elapsed time after ignition is switched ON/main power is switched ON |
| MOTOR_RPM | rpm | Displays electric motor speed |
| POWER_MODE | OFF/ACC/ON/CRANK | Ignition/main power status |
| SELECTOR_LEVER_P_LCK | Unknown/Locked/Unlocked/Possible to Lock | Shift lock state. |
| SELECTOR_LEVER_POS | Unknown/P position/R position/N position/D position/Fault | Selector lever position status |
| SHIFT_POS | Parking/Neutral/Parking/Reverse/Neutral/between 2 position/Forward Drive 1/Forward Drive 2/Forward Drive 3/Forward Drive 4/Forward Drive 5/Forward Drive 6/Forward Drive 7/Forward Drive 8/Invalid | Shift position |
| TOTAL_DIST | km, ft, mi | Accumulated total traveled distance from completion of vehicle until selector lever detects a DTC |
| VPWR | V | Selector lever power supply voltage |
| VPWR_CBCM | V | Body control module (BCM) power supply voltage |
| VSS | Kph, Mph | Vehicle speed status |