DTC C1045-00: TCS/DSC Control System
C1045: 00 (SGC2/DMCM (WITH MAZDA M HYBRID BOOST)) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
TCS/DSC control system
Electronically controlled brake unit (internal malfunction)
Configuration data
Power supply (low input)
Power supply system |
| Detection condition |
- The drive motor control module detects that the electronically controlled brake unit stores the following DTCs.
- C006B: 00
- C05C3: 49
- C1043: 41
- C1043: 45
- C1044: 46
- C1045: 48
- C1045: 49
- C1046: 49
- C1047: 49
- C1048: 47
- C1048: 49
- U2101: 56
- U2101: 57
- U2300: 52
- U2300: 54
- U2300: 55
- U2300: 56
- U2300: 64
- U3000: 49
- U3003: 1C
- U3003: 9A
|
| Fail-safe |
|
| Possible cause |
- DTCs are stored in the electronically controlled brake unit. (See DTC TABLE [DSC]
.)
NOTE:
- If the electronically controlled brake unit stores a DTC, the drive motor control module stores the same DTC or similar.
- If the drive motor control module stores a DTC even though the electronically controlled brake unit does not store a DTC, clear the DTC as it was for a past malfunction, and then complete the repair.
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (See CLEARING DTC
.)
|
| System wiring diagram |
|