DTC B14F1-4A: Front Side Radar Sensor Matching Error
WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
B14F1: 4A (VCM) DETECTION CONDITION AND POSSIBLE CAUSE
| System malfunction location |
Front side radar sensor matching error |
| Detection condition |
- The vehicle control module (VCM) detects a sensor different from the one equipped to the vehicle.
|
| Fail-safe |
(See DTC TABLE [VCM]
.) |
| Possible cause |
- Internal malfunction related DTCs are stored in the following modules.
- DTCs are stored in the following modules.
- Incorrect assembly of front side radar sensor (LH)/(RH) (Refer to applicable FRONT SIDE RADAR SENSOR REMOVAL/INSTALLATION
in the service information.)
- Front side radar sensor (LH) malfunction (Refer to applicable FRONT SIDE RADAR SENSOR REMOVAL/INSTALLATION
in the service information.)
- Front side radar sensor (RH) malfunction (Refer to applicable FRONT SIDE RADAR SENSOR REMOVAL/INSTALLATION
in the service information.)
- Vehicle control module (VCM) malfunction (built into body control module (BCM)) (Refer to applicable BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION
in the service information.)
|
| Repeatability verification procedure |
- Clear the DTC recorded in the memory. (see CLEARING DTC
.)
|
| System wiring diagram |
|