Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Dynamic Stability Control (Service Information)) >> DSC HU/Cm Removal/Installation >> Brake Pipe Installation Note

Brake Pipe Installation Note

WARNING: This page is about a different car, the 2024 Mazda CX-30. However, it is still accessible from the selected car via links, so may be relevant.
  1. Align the marks made before removal and install the brake pipe to the DSC HU/CM and brake pipe joint referring to the figure.
    G16374354Courtesy of MAZDA MOTORS CORP.
  2. Tighten the brake pipe to the specified torque using the commercially available flare nut wrench.
scientia non olet · About Mike's Workshop Manuals