Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2024 >> CX-90 Turbo Select >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (VIN C & VIN D) >> Barometric Pressure (BARO) Sensor Inspection [H3T] >> Inspect BARO Sensor >> Notes

Inspect BARO Sensor: Notes

NOTE:
  • The BARO sensor is built into the PCM. If the BARO sensor is replaced, replace the PCM.
  • Perform the procedure with the M-MDS connected to the DLC-2.
  • Perform the procedure with the main power switched ON (READY off or on).
scientia non olet · About Mike's Workshop Manuals