DTC inspection
- Using the M-MDS, perform DTC inspection and verify if any 360° view monitor control module-related DTCs are detected. (Refer to [DTC INSPECTION
] in the Troubleshooting Service Information)
DTC is detected
- If DTC U3000:04, U3000:42, or U3000:49 is detected, replace the 360° view monitor control module. (See 360° VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION ).
- If the detected DTC is other than U3000:04, U3000:42, or U3000:49, inspect for the possible cause of the detected DTC starting from the top. (Refer to [DTC TABLE [VMC]
] in the Troubleshooting Service Information)
- If the malfunction is not resolved, replace the 360° view monitor control module. (See 360° VIEW MONITOR CONTROL MODULE REMOVAL/INSTALLATION ).
No DTC is detected
- Perform a visual inspection. (See Visual inspection ).