Snapshot Data Item Table
NOTE:
- Refer to PID/DATA monitor table for confirm the transmission control system operation status while the TCM does not store the DTC. (See PID/DATA MONITOR INSPECTION .) (See PID/DATA MONITOR TABLE [TCM] .)
- Snapshot data items are not displayed, according to detected DTC.
SNAPSHOT DATA SPECIFICATION (TCM)
| Snapshot data item | Unit/Operation | Data contents |
|---|---|---|
| APP | % | Accelerator pedal position status |
| APP1 | % | Accelerator pedal opening angle (absolute value) input from APP sensor No. 1 |
| AUX_RLY_B | False/True | Electric AT oil pump relay condition |
| CLTCH_OIL_PRES_SW1 | False/True | Oil pressure switch No. 1 |
| CLTCH_OIL_PRES_SW2 | False/True | Oil pressure switch No. 2 |
| CLTCH_OIL_PRES_SW3 | False/True | Oil pressure switch No. 3 |
| CLTCH_OIL_PRES_SW4 | False/True | Oil pressure switch No. 4 |
| ECT | °C, °F | Engine coolant temperature |
| ENG_RPM | rpm | Engine speed status |
| ENG_RUN_TIME | Second | Time since engine start |
| GEAR_INH_1ST | False/True | 1GR is inhibited due to malfunction. |
| GEAR_INH_2ND | False/True | 2GR is inhibited due to malfunction. |
| GEAR_INH_3RD | False/True | 3GR is inhibited due to malfunction. |
| GEAR_INH_4TH | False/True | 4GR is inhibited due to malfunction. |
| GEAR_INH_5TH | False/True | 5GR is inhibited due to malfunction. |
| GEAR_INH_6TH | False/True | 6GR is inhibited due to malfunction. |
| GEAR_INH_N | False/True | N position is inhibited due to malfunction. |
| GEAR_INH_R | False/True | R position is inhibited due to malfunction. |
| GEAR_SEL | Not active/1st gear commanded/2nd gear commanded/3rd gear commanded/4th gear commanded/5th gear commanded/6th gear commanded/Low/Drive/Neutral/Reverse/Park | Gear shift position |
| GEAR_SHIFTING | Lockup Off/Active | Shift control status |
| GLOBAL_REAL_TIME | min | Accumulated total elapsed time since vehicle completion until TCM detects a DTC |
| HI_TEMP_MODE_DIST | km, ft, mi | Travel distance since determination of ATF high temperature mode |
| IAT | °C, °F | Intake air temperature |
| LCK_UP | Lockup Off/Slipping Lockup/Lockup On | Torque converter TCC condition |
| LOAD_CALC | % | Calculated engine load |
| OSS | Rpm | Output shaft speed |
| PDDL_DOWN | False/True | Shift down operation using steering shift switch |
| PDDL_UP | False/True | Shift up operation using steering shift switch |
| SER_NUM_DTC | - | DTC |
| SFTR_DOWN | False/True | Shift down operation using selector lever |
| SFTR_UP | False/True | Shift up operation using selector lever |
| SHIFT_A_M | False/True | Transaxle range sensor position |
| SHIFT_CTRL_MODE | Default Shift Mode/Manual Shift Mode/Cruise Control Mode/Transmission Fluid High Temperature Mode/Direct Manual Shift Mode/Driving Force Shift Mode/Fail-safe Shift Mode | Shift control mode |
| SHIFT_D | False/True | Transaxle range sensor position |
| SHIFT_EVENT_STAT | No valid data/1st gear before the shift, 2nd gear after the shift/1st gear before the shift, 3rd gear after the shift/1st gear before the shift, 4th gear after the shift/1st gear before the shift, 5th gear after the shift/1st gear before the shift, 6th gear after the shift/2nd gear before the shift, 1st gear after the shift/2nd gear before the shift, 3rd gear after the shift/2nd gear before the shift, 4th gear after the shift/2nd gear before the shift, 5th gear after the shift/2nd gear before the shift, 6th gear after the shift/3rd gear before the shift, 1st gear after the shift/3rd gear before the shift, 2nd gear after the shift/3rd gear before the shift, 4th gear after the shift/3rd gear before the shift, 5th gear after the shift/3rd gear before the shift, 6th gear after the shift/4th gear before the shift, 1st gear after the shift/4th gear before the shift, 2nd gear after the shift/4th gear before the shift, 3rd gear after the shift/4th gear before the shift, 5th gear after the shift/4th gear before the shift, 6th gear after the shift/5th gear before the shift, 1st gear after the shift/5th gear before the shift, 2nd gear after the shift/5th gear before the shift, 3rd gear after the shift/5th gear before the shift, 4th gear after the shift/5th gear before the shift, 6th gear after the shift/6th gear before the shift, 1st gear after the shift/6th gear before the shift, 2nd gear after the shift/6th gear before the shift, 3rd gear after the shift/6th gear before the shift, 4th gear after the shift/6th gear before the shift, 5th gear after the shift | The gear shift position before shifting gears is displayed. |
| SHIFT_N | False/True | Transaxle range sensor position |
| SHIFT_P | False/True | Transaxle range sensor position |
| SHIFT_R | False/True | Transaxle range sensor position |
| SHIFT_SOL_ON_OFF | False/True | On/off solenoid condition |
| SLIP_VAL | Rpm | Actual slip value between TSS and OSS |
| TFT | °C, °F | ATF temperature |
| TOTAL_DIST | km, ft, mi | Accumulated total traveled distance from completion of vehicle until TCM detects a DTC |
| TRQ_DSD | Nm | Desired engine torque |
| TSS | Rpm | Turbine/input shaft speed |
| VPWR | V | TCM power supply voltage |
| VSS | Kph, Mph | Vehicle speed status |