DTC U2501-68: Error Signal Received From Vehicle Control Module (VCM)

U2501-68: (DSC) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location	Error signal received from vehicle control module (VCM)
Detection condition	The electronically controlled brake unit/DSC HU/CM receives the error signal from the vehicle control module (VCM).
Fail-safe	(See DTC TABLE [DSC] .)
Possible cause	DTCs are stored in the vehicle control module (VCM). (See DTC TABLE [VCM] .) Body control module (BCM) malfunction (vehicle control module (VCM) malfunction) (Refer to BODY CONTROL MODULE (BCM) REMOVAL/INSTALLATION in service information.)
Repeatability verification procedure	Clear the DTC recorded in the memory. (See CLEARING DTC .)
System wiring diagram	Not applicable