Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2022 >> CX-5 S Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 303 (Dynamic Stability Control System (Service Information)) >> Auto Hold Switch Inspection >> Continuity Inspection

Continuity Inspection

WARNING: This page is about a different car, the 2021 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the electric parking brake switch. (See ELECTRIC PARKING BRAKE SWITCH REMOVAL/INSTALLATION .)
  3. Verify that the continuity is as indicated in the table.
    G11426969Courtesy of MAZDA MOTORS CORP.
    G11426970Courtesy of MAZDA MOTORS CORP.
    • If not as indicated in the table, replace the electric parking brake switch.
scientia non olet · About Mike's Workshop Manuals