Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2022 >> CX-5 S Select >> Repair and Diagnosis >> External Pages >> Different car >> Section 302 (On-Board Diagnostic - Dynamic Stability Control System) >> DTC U0420-00: ABNORMAL MESSAGE FROM EPS CONTROL MODULE [DSC HU/Control Module] >> Notes

DTC U0420-00: ABNORMAL MESSAGE FROM EPS CONTROL MODULE [DSC HU/Control Module]: Notes

WARNING: This page is about a different car, the 2021 Mazda CX-5. However, it is still accessible from the selected car via links, so may be relevant.
DTC U0420:00 Abnormal message from EPS control module
DETECTION CONDITION
  • Correct data cannot be received from EPS control module
FAIL-SAFE FUNCTION Refer to "DTC Table" and "Fail-safe Function Malfunction Contents". (See DTC TABLE [DSC HU/Control Module] .)
POSSIBLE CAUSE
  • EPS control module malfunction
SYSTEM WIRING DIAGRAM Not applicable