DTC C0061-54:/C0062-54:/C0063-54: DSC HU/CM System Unperformed Initialization Procedure: Notes

DTC C0061:54/C0062:54/C0063:54 (DSC HU/CM) DETECTION CONDITION AND POSSIBLE CAUSE

DTC	C0061:54, C0062:54, C0063:54	DSC HU/CM system (unperformed initialization procedure)
DETECTION CONDITION	C0061:54 DSC HU/CM detects that the initialization procedure has not been performed. (Lateral acceleration sensor) C0062:54 DSC HU/CM detects that the initialization procedure has not been performed. (Longitudinal acceleration sensor) C0063:54 DSC HU/CM detects that the initialization procedure has not been performed. (Yaw rate sensor)
FAIL-SAFE FUNCTION	Refer to "DTC Table" and "Fail-safe Function Malfunction Contents". (See DTC TABLE [DSC HU/CM] ).
POSSIBLE CAUSE	Initialization procedure for the lateral acceleration sensor, longitudinal acceleration sensor or yaw rate sensor not performed SAS control module malfunction DSC HU/CM malfunction
SYSTEM WIRING DIAGRAM	Not applicable