Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2022 >> CX-30 Select >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Engine Control System (VIN Y)) >> Crankshaft Position (CKP) Sensor Removal/Installation >> CKP Sensor Learning Value Clearing Procedure

CKP Sensor Learning Value Clearing Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Shift the selector lever to the P position.
  2. Perform the following procedure within 10 s.
    1. Switch the ignition ON (engine off)
    2. Fully depress the accelerator pedal
    3. Release and depress the brake pedal 5 times with the accelerator pedal depressed.
  3. Verify that the wrench indicator light turns on for approx. 3 s and turns off.
scientia non olet · About Mike's Workshop Manuals