Door-Electrical Supply Unit Inspection: Notes
- Disconnect the negative battery terminal.
- (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
- Remove the front door trim.
- (See FRONT DOOR TRIM REMOVAL/INSTALLATION [(US)] .)
- Connect the negative battery terminal.
- (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
- Verify that the voltages of each of the terminals are as indicated in the terminal voltage table (reference).
- If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.
- If the system does not operate normally even though the inspection items are normal, replace the door-electrical supply unit.
- (See DOOR-ELECTRICAL SUPPLY UNIT REMOVAL/INSTALLATION .)
- If the voltage is not as specified in the terminal voltage table (reference), inspect the parts under Inspection item(s) and related wiring harnesses.