Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 97 (On-Board Diagnostic - Vehicle Control Module (1 Of 2)) >> DTC B14F3-88: Unit Communication Error (HS-Can) [Vehicle Control Module] >> Outline

DTC B14F3-88: Unit Communication Error (HS-Can) [Vehicle Control Module]: Outline

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DTC B14F3:88 [VEHICLE CONTROL MODULE] DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Unit communication error (HS-CAN)
Detection condition
  • The vehicle control module (VCM) received a BUS OFF signal (HS-CAN) from the driver monitoring camera unit for 10 s.
Fail-safe (See DTC TABLE [VEHICLE CONTROL MODULE (US)] .)
Possible cause
  • Malfunction in CAN BUS communication line between vehicle control module (VCM) and driver monitoring camera unit
  • Driver monitoring camera unit malfunction
  • Vehicle control module (VCM) malfunction
System wiring diagram Not applicable