Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (On-Board Diagnostics - Dynamic Stability Control (DSC)) >> DTC U0151-00: Communication Error With SAS Control Module [DSC HU/Cm] >> Outline

DTC U0151-00: Communication Error With SAS Control Module [DSC HU/Cm]: Outline

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
DTC U0151:00 (DSC HU/CM) DETECTION CONDITION AND POSSIBLE CAUSE

System malfunction location Communication error with SAS control module
Detection condition
  • The DSC HU/CM cannot receive CAN signal from the SAS control module.
Fail-safe Refer to "DTC Table" and "Fail-safe Function Malfunction Contents Table".
(See DTC TABLE [DSC HU/CM (US)] .)
Possible cause
  • Malfunction in CAN communication line between SAS control module and DSC HU/CM
System wiring diagram Not applicable
Connector diagram Not applicable
scientia non olet · About Mike's Workshop Manuals