Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Control System (VIN Y)) >> Crankshaft Position (CKP) Sensor Removal/Installation >> CKP Sensor Learning Value Clearing Procedure

CKP Sensor Learning Value Clearing Procedure

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Shift the selector lever to the P position.
  2. Perform the following procedure within 10 s.
    1. Switch the ignition ON (engine off).
    2. Fully depress the accelerator pedal.
    3. Release and depress the brake pedal 5 times with the accelerator pedal depressed.
  3. Verify that the wrench indicator light turns on for approx. 3 s and turns off.
    • If the wrench indicator light does not turn on, repeat the procedure from Step  1.
scientia non olet · About Mike's Workshop Manuals