Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (Glass/Windows/Mirrors) >> Front Door Glass Run-Channel Removal/Installation (Us) >> Rivet Installation Note

Rivet Installation Note

WARNING: This page is about a different car, the 2021 Mazda 3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Cut off the area shown in the figure.
    G13717099Courtesy of MAZDA MOTORS CORP.
  2. Install the fastener to the front door glass run-channel.
    G13717100Courtesy of MAZDA MOTORS CORP.
  3. Install the fastener.
    G13717090Courtesy of MAZDA MOTORS CORP.
  4. Verify that the difference in level between the front door garnish and the front door glass run-channel is within the range shown in the figure.
    G13717102Courtesy of MAZDA MOTORS CORP.
  5. Install the rivet.
  6. Apply cloth packing tape to the position shown in the figure.
scientia non olet · About Mike's Workshop Manuals