Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Mazda >> 2021 >> MX-5 Miata RF Club, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 53 (Dynamic Stability Control (Service Information)) >> DSC HU/Cm Inspection >> Notes

DSC HU/Cm Inspection: Notes

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the DSC HU/CM connector. (See DSC HU/CM REMOVAL/INSTALLATION .)
  2. Measure the voltage or continuity of the DSC HU/CM wiring harness-side connctor using a tester.
Fig 1: Identifying DSC HU/CM Wiring Harness-Side Connector Terminals
G10952486Courtesy of MAZDA MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals