Nut, Washer and Control Rod Component Removal Note

WARNING: This page is about a different car, the 2016 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Secure the control rod component with an adjustable wrench as shown in the figure.

Fig 1: Securing Control Rod Component With Adjustable Wrench
Courtesy of MAZDA MOTORS CORP.
CAUTION:
- Do not use an impact wrench.
- When loosening the control rod nut, secure the control rod component without applying torque within the AT.
Remove the control rod nut.

Fig 2: Removing Control Rod Nut
Courtesy of MAZDA MOTORS CORP.
Remove the washer and control rod component.