DTC U2300-56: Configuration Data Unmatched With Instrument Cluster [Blind Spot Monitoring (BSM) Control Module]: Notes
DTC U2300:56 (BLIND SPOT MONITORING CONTROL MODULE) DETECTION CONDITION AND POSSIBLE CAUSE
| Description |
Configuration data unmatched with instrument cluster |
| DETECTION CONDITION |
- Configuration data of the blind spot monitoring (BSM) control module and instrument cluster are not matched with the ignition switched ON (engine off or on).
|
| Fail-safe |
- Blind spot monitoring (BSM) system is stopped.
|
| Possible cause |
NOTE:
- To correctly write the configuration data sent from the instrument cluster to the blind spot monitoring (BSM) control module (LH) to the blind spot monitoring (BSM) control module (LH), 30 s or more need to have elapsed since the ignition was switched ON (engine off or on).
- DTCs are stored in the instrument cluster.
- Instrument cluster configuration not implemented
- Instrument cluster internal memory malfunction
- Instrument cluster configuration data error
- Blind spot monitoring (BSM) control module (LH) malfunction
|
| SYSTEM WIRING DIAGRAM |
Not applicable |